
Downloaded from www.Manualslib.com manuals search engine 1 
Vehicle Symbols 
These are some of the symbols you may find on your vehicle. 
For example, 
these symbols 
are  used  on an 
original battery: 
POSSIBLE A 
CAUTION 
INJURY 
PROTECT  EYES  BY 
SHIELDING 
CAUSTIC 
BURNS 
SPARK 
OR ,111, 
COULD  FLAME 
EXPLODE  BATTERY 
These symbols are important 
for  you  and 
your passengers 
whenever your  vehicle 
is 
driven: 
DOOR  LOCK 
UNLOCK 
FASTEN  SEAT 
BELTS 
POWER 
WINDOW 
These symbols  have 
to do with 
your lights: 
SIGNALS e 
TURN 
RUNNING 
* 0 
DAYTIME - 
LAMPS '.* 
FOG  LAMPS $0 
These symbols 
are  on some 
of 
your  controls: 
WINDSHIELD 
WIPER 
WINDSHIELD  DEFROSTER 
VENTILATING  FAN 
These symbols are  used  on 
warning  and 
indicator lights: 
COOLANT - 
TEMP - 
CHARGING I-1 
BATTERY 
SYSTEM 
BRAKE 
(0) 
COOLANT a 
ENGINE PRESSURE  OIL e, 
ANTI-LOCK (@) 
BRAKES 
Here are some 
other symbols 
you  may  see: 
FUSE 
LIGHTER 
m 
HORN k3 
SPEAKER 
b 
FUEL B3 
V   

Downloaded from www.Manualslib.com manuals search engine Parking  Brake 
To set  the  parking brake,  hold the regular brake pedal 
down  with  your right  foot. Push  down the parking  brake 
pedal  with  your left foot. If the  ignition  is  on, the brake 
system  warning  light will  come  on. 
To release the parking  brake  hold  the regular brake 
pedal  down. 
lr Pull the BRAKE RELEASE 
lever.  It  is located on  the 
bottom  driver’s side  of 
the 
instrument panel. 
I NOTICE: 
Driving  with  the  parking  brake  on  can  cause 
your  rear  brakes  to  overheat.  You  may  have  to 
replace  them,  and  you  could  also damage  other 
parts 
of your  vehicle. 
If  you  are towing  a trailer and you must park on a  hill, 
see  “Towing  a Trailer”  in  the  Index.  That section  shows 
what  to  do  first 
to keep the trailer from  moving. 
2-25   

Downloaded from www.Manualslib.com manuals search engine 1 
Warning  Lights,  Gages and Indicators 
This part describes.  the  warning  lights and  gages  that 
may  be on  your vehicle. The pictures  will  help  you 
locate  them. 
Warning  lights and gages  can signal that something  is 
wrong before  it becomes serious enough  to cause 
an 
expensive  repair or replacement. Paying attention to 
your  waxking  lights and  gages  could also  save you or 
others from  injury. 
’ 
Warning lights come on  when  there  may  be  or is a 
problem  with  one of your  vehicle’s  functions. 
As you 
will see  in  the details  on  the  next  few pages, some 
warning  lights come on briefly  when’you  start the 
engine  just to let  you  know  they’re working.  If  you are 
familiar  with this section,  you  should  not  be  alarmed 
when  this  happens. 
Gages can indicate  when there may be or is a problem 
with  one of your  vehicle’s  functions. Often gages  and 
warning  lights work together to  let  you  know  when 
there’s  a problem  with  your  vehicle. 
i 
When  one.of the  warning lights comes on  and  stays  on 
when  you 
are driving, or when  one of the  gages  shows 
there  may  be  a problem,  check the section  that  tells  you 
what  to do about  it. Please follow this  manual’s  advice. 
Waiting  to do  repairs can  be costly 
-- and even 
dangerous. 
So please get  to  know  your  warning  lights 
and  gages. They’re a  big  help. 
Safety  Belt  Reminder  Light 
When  the  key is turned  to RUN or START,  a tone  will 
come on  for about  eight seconds  to rernind  people  to 
fasten their  safety belts, unless  the  driver’s safety belt 
is 
already  buckled. 
The safety  belt light  will 
also come  on  and  stay  on 
for  about 
20 seconds,  then 
it  will  flash  for about 
55 seconds.  If the  driver’s 
belt  is already  buckled, 
neither the  tone nor the 
light  will come on. 
2-53   

Downloaded from www.Manualslib.com manuals search engine Voltmeter 
‘When  your engine is  not 
ninning,  but the ignition 
is 
on (in  the  RUN  position), 
this  gage  shows  your 
battery’s  state of charge  in 
DC volts.  You 
can only  drive  for a short  time  with  the reading  in 
either  warning  zone. 
If you  must  drive, turn off all 
unnecessary  accessories. 
Readings  in  either warning  zone  indicate a possible 
problem 
in the electrical  system. Have the vehicle 
serviced  as soon  as  possible. 
Brake  System  Warning  Light 
When the engine is running, the gage shows the 
condition  of the  charging  system. Readings  between the 
low and  high  warning  zones indicate the  normal 
operating  range. 
 
Readings in the low  warning  zone  may  occur when a 
large number 
of electrical accessories are operating  in 
the  vehicle  and  the engine 
is left at an  idle  for an 
extended period. This condition is  normal since the 
charging  system is  not able to provide  full power  at 
engine idle.  As engine speeds are increased,  this 
condition  should correct  itself as higher  engine speeds 
allow  the charging system  to create  maximum  power.  Your 
vehicle’s  hydraulic  brake  system  is divided  into 
two  parts. 
If one part  isn’t  working,  the other  part  can 
still  work  and  stop you.  For  good braking,  though,  you 
need  both  parts working  well. 
If the  warning  light comes on,  there  could be a brake 
problem.  Have your  brake  system  inspected  right away. 
This light  should come 
on  briefly  when  you  turn 
the  ignition  key to RUN. 
If it doesn’t come on  then, BRAKE 
have it fixed so it  will  be 
ready  to 
warn you  if  there’s 
2-55   

Downloaded from www.Manualslib.com manuals search engine If the  light  c.omes on while you are driving,  pull  off  the 
road  and stop  carefully.  You may  notice  that  the  pedal  is 
harder  to push.  Or,  the  pedal  may  go closer  to the  floor. 
It  may  take longer to stop.  If the  light  is  still  on,  have  the 
vehicle  towed for service.  (See “Towing  Your  Vehicle” 
in  the  Index.) 
A CAUTION: 
I 
Your  brake  system  may  not  be  working  properly 
if  the  brake  system  warning  light 
is on.  Driving 
with  the  brake  system  warning  light  on  can  lead 
to an  accident. If the  light  is still  on  after  you’ve 
pulled 
off the  road  and  stopped  carefully,  have 
the  vehicle  towed  for service. 
When  the  ignition  is on,  the  brake  system  warning  light 
will  also  come  on when  you 
set your  parking  brake.  The 
light  will  stay 
on if  your  parking  brake  doesn’t  release 
fully. 
If it  stays  on after  your  parking  brake  is  fully 
released,  it  means  you  have  a brake  problem. 
Anti-Lock  Brake  System  Warning  Light 
ANTI - LOCK 
With  the  anti-lock brake 
system,  this  light  will 
come 
on when  you  start 
your  engine  and  may  stay 
on for several  seconds. 
That’s  normal. 
If  the  light  stays  on, or 
comes on when  you’re  driving, 
your  vehicle  needs  service.  If the  regular  brake  system 
warning  light  isn’t 
on, you still  have  brakes,  but you 
don’t  have  anti-lock  brakes.  If the  regular  brake  system 
warning  light  is  also on,  you  don’t  have  anti-lock  brakes 
and  there’s 
a problem  with  your  regular  brakes.  See 
“Brake System  Warning Light” earlier  in  this  part. 
The  anti-lock  brake  system  warning  light  should  come 
on  briefly  when 
you turn  the  ignition  key to RUN. If the 
light  doesn’t  come 
on then,  have  it  fixed so it  will  be 
ready 
to warn  you  if  there  is  a problem. 
2-56   

Downloaded from www.Manualslib.com manuals search engine Check  Gages  Light 
The CHECK GAGES light 
will  come on  briefly  when 
you  are starting  the  engine. 
CHECK 
GAGES 
If the light comes  on  and  stays on  while  you  are  driving, 
check  your  coolant temperature  and  engine oil pressure 
gages  to see  if they  are 
in the  warning  zones. 
Fuel Gage 
When  the  ignition is on, the 
fuel  gage  tells 
you about 
how  much  fuel 
you 
have  remaining. 
Here  are  four  things  that  some owners  ask  about.  None 
of these  show  a problem  with  your  fuel gage: 
At the  gas  station,  the  gas pump shuts off  before  the 
It takes  a little  more  or less  fuel  to fill  up than the 
gage  reads 
FULL (F). 
gage  indicated.  For  example, the gage  may  have 
indicated  the  tank  was  half  full, but  it  actually  took  a 
little  more  or less  than  half  the  tank’s  capacity  to fill 
the  tank. 
The  gage  moves  a little  when  you  turn  a corner or 
speed up. 
The  gage  doesn’t go back  to EMPTY (E) when you 
turn  off  the  ignition. 
2-62   

Downloaded from www.Manualslib.com manuals search engine Avoid  needless  heavy  braking. Some people  drive in 
spurts -- heavy  acceleration  followed by  heavy 
braking 
-- rather  than  keeping  pace  with  traffic.  This 
is  a mistake.  Your brakes  may  not  have  time  to cool 
between  hard  stops. Your brakes  will  wear  out much 
faster  if  you 
do a lot of heavy  braking.  If you keep pace 
with  the traffic  and  allow  realistic following  distances, 
you  will  eliminate a  lot 
of unnecessary  braking.  That 
means  better  braking  and longer brake  life. 
If  your  engine ever stops while you’re  driving,  brake 
normally  but  don’t  pump  your  brakes.  If  you do, 
the 
pedal  may  get harder to push  down.  If your  engine 
stops, 
you will  still  have  some power  brake assist.  But 
you  will  use  it when  you  brake.  Once the  power  assist  is 
used  up, 
it may  take  longer to stop and  the  brake pedal 
will  be  harder  to push. 
Anti-Lock Brakes 
Your  vehicle  has  anti-lock  brakes  (ABS).  ABS  is  an 
advanced  electronic  braking  system  that  will  help 
prevent 
a braking  skid. 
When  you  start  your  engine and begin  to drive  away, 
your  anti-lock  brake  system  will  check itself. 
You may 
hear  a momentary  motor  or clicking noise  while  this  test 
is  going  on. This  is  normal. 
If  there’s a problem  with  the 
anti-lock  brake  system,  this 
warning light  will  stay 
on. 
See “Anti-Lock  Brake 
System  Warning  Light”  in 
the Index. 
4-6   

Downloaded from www.Manualslib.com manuals search engine City Driving One of the  biggest  problems  with  city  streets is the 
amount  of  traffic 
on them. You'll want  to  watch  out for 
what  the  other drivers are doing  and  pay  attention to 
traffic  signals. 
Here 
are ways  to increase  your  safety  in  city  driving: 
Know  the  best  way to get  to where  you  are 
going.  Get 
a city  map  and plan  your  trip  into an 
unknown  part 
of the  city  just as you  would  for a 
cross-country  trip. 
Try to use the freeways  that rim  and  crisscross  most 
large  cities. 
You'll save time and  energy.  (See the 
next  part,  "Freeway  Driving.") 
Treat a green  light  as a  warning  signal. A traffic  light 
is there  because  the  corner is busy enough to need it. 
When  a  light  turns  green, 
and just before  you  start  to 
move,  check  both  ways  for vehicles  that  have not 
cleared  the  intersection  or may  be  running  the 
red  light. 
4-32