1996 CHEVROLET MONTE CARLO oil viscosity

Downloaded from www.Manualslib.com manuals search engine : Kind of Oil to
Oils recommended for your vehicle can be identified by
looking for the “Starburst” symbol. This symbol
indicates that the oil has been certified by the American
Petroleum Institute
(API). Do not use any oil which
does not carry this Starburst symbol.
1 If you change your own oil,
i be sure you use oil that has
the Starburst symbol on the
front of the oil container.
3.1
L L82 (Code M) Engine 3.4L LQ 1 (Code X) Engine
Just
fill it enough to put the level somewhere in the
proper operating range. Push the dipstick all the way
back
in when you’re through.
If you have your
oil changed for you, be sure the oil put
into your engine
is American Petroleum Institute
certified
for gasoline engines.
You should also use the proper viscosity oil for your
vehicle, as shown
in the following chart:
6-11

Downloaded from www.Manualslib.com manuals search engine RECOMMENDED SAE VISCOSITY GRADE ENGINE OILS ~~~ ~
FOR BEST FUEL ECONOMY AND COLD STARTING, SELECT THE LOWEST
SAE VISCOSITY GRADE OIL
FOR THE EXPECTED TEMPERATURE RANGE.
HOT
WEATHER
“F
k 100-
+ 80 -
+ 60 -
+ 40 -
+ 20.
0-
i
7
“C
. + 38
- + 27
- + 16
- +4
--7
--18
LOOK
FOR THIS
SYMBOL
SAE 1OW-30
SAE gW-30 PREFERRED
COLD
WEATHER
DO NOT USE SAE 2OW-50 OR ANY OTHER GRADE OIL NOT RECOMMENDED
As shown in the chart, unless you have the 3.4L engine,
SAE
5W-30 is best for your vehicle. However, you can
use SAE
1OW-30 if it’s going to be 0°F (-18°C)
or above. These numbers on an oil container show its
viscosity,
or thickness. Do not use other viscosity oils,
such
as SAE 20W-50.

Downloaded from www.Manualslib.com manuals search engine RECOMMENDED SAE VISCOSITY GRADE ENGINE OILS
FOR BEST FUEL ECONOMY AND COLD STARTING, SELECT ME LOWEST
SAE VISCOSITY GRADE
OIL FOR THE EXPECTED TEMPERATURE RANGE. -~ -~
MOT
WEATHER
j SAE 5w-30
COLD
WEATHER
LOOK
FOR MIS
SYMBOL
8- SAE I 1OW-30
PREFERRED above 0°F (-18T)
DO NOT USE SAE 2OW-50 OR ANY OTHER GRADE OIL NOT RECOMMENDED
As shown in the chart, if you have the 3.4L engine,
SAE IOW-30 is best for your vehicle. However, you can
use SAE
5W-30 if it’s going to be colder than 60°F
( 16°C) before your next oil change. When it’s very cold,
you should use
SAE 5W-30. These numbers on an oil
container show its viscosity,
or thickness. Do not use
other viscosity
oils, such as SAE 20W-50.
I NOTICE:
Use only engine oil with the American Petroleum
Institute Certified For Gasoline Engines
“Starburst” symbol. Failure to use the
recommended oil can result in engine damage
not covered by your warranty.
GM Goodwrench@ oil meets all the requirements for
your vehicle.
l-7 ngin -
Don’t add anything to your oil. Your Chevrolet dealer is
ready to advise
if you think something should be added.
6-13

Downloaded from www.Manualslib.com manuals search engine 1 Part D: Recommended Fluids and
Lubricants
NOTE: Fluids and lubricants identified below by name,
part number or ‘specification may be obtained from your
GM dealer.
USAGE
Engine Oil
Engine Coolant
FLUIDLUBRICANT
Engine oil with the American
Petroleum Institute Certified For Gasoline Engines “Starburst”
symbol of the proper viscosity. To
determine the preferred viscosity
for your vehicle’s engine, see
“Engine Oil” in the Index.
5050 mixture of water (preferably
distilled) and GM Goodwrench@
DEX-COOL
TM or Havoline’
DEX-COOL
TM (orange-colored,
silicate-free) antifreeze conforming
to GM Specification 6277M. See
“Engine Coolant” in the Index.

USAGE
FLUIDLUBRICANT
Coolant
flush and refill.
Sealer equivalent
with a complete
Supplement GM
Part No. 3634621 or
Hydraulic Brake Delco Supreme
11’ Brake Fluid
System (GM
Part No. 1052535 or
equivalent DOT-3 brake fluid).
Power Steering GM Power Steering Fluid
System (GM
Part No. 1052884
- 1 pint,
Automatic DEXR0N’-111 Automatic
Transaxle Transmission Fluid.
105001 7 - 1 quart, or equivalent).
7-41