
Downloaded from www.Manualslib.com manuals search engine Tilt Wheel (Option) 
A tilt steering  wheel allows  you to adjust  the  steering 
wheel  before  you drive.  You can  also  raise 
it to the 
highest  level to give  your  legs more  room when  you 
enter  and exit  the vehicle. 
To tilt the wheel,  hold the  steering wheel  and pull the 
lever.  Move  the steering  wheel 
to a comfortable  level, 
then release the  lever  to lock the  wheel 
in place. 
Turn  SignaVMultifunction Lever 
The lever on the left side of the steering  column 
includes  your: 
0 Turn Signal and Lane Changer 
0 Headlamp  High/Low  Beam  Changer 
0 Windshield Wipers 
0 Windshield Washer 
0 Cruise Control  (Option) 
2-29   

Downloaded from www.Manualslib.com manuals search engine ’hrn  Signal  and  Lane  Change  Signals 
The turn signal has  two upward (for right) and two 
downward  (for left) positions.  These positions  allow 
you 
to signal a turn  or a lane  change. 
To signal 
a turn, move the lever all the  way up or  down. 
When the turn  is finished,  the lever will return 
automatically. 
An arrow  on the instrument 
panel  will flash  in the 
direction  of the turn  or 
lane  change. 
To signal a lane  change,  just raise  or lower the lever 
until 
the arrow starts to  flash. Hold it there until you 
complete  your lane change.  The lever  will return  by 
itself when 
you release  it.  As 
you signal 
a turn  or a lane change,  if the  arrows  flash 
at twice the normal rate,  a signal  bulb may  be  burned 
out  and  other drivers  may  not see your turn signal. 
If a  bulb is burned out, replace it  to help avoid an 
accident.  If.the  arrows  don’t go  on  at all when 
you 
signal  a  turn,  check for burned-out  bulbs and  a blown 
fuse  (see “Fuses and  Circuit Breakers”  in the Index). 
Headlamp  High/Low  Beam  Changer 
To  change  the headlamps  from low beam  to high  or high 
to low,  pull the multifunction  lever all the  way  toward 
you. Then release it. 
When the high beams are 
on, this light  on the 
instrument panel  also 
will  be on. 
2-30 
.-   

Downloaded from www.Manualslib.com manuals search engine Rotate the switch knob clockwise again  to the master 
lighting symbol 
to turn on all the lamps listed as  well as 
the headlamps. 
Rotate the switch counterclockwise  to 
OFF to turn  off 
your lamps. 
Rotate the  thumb  wheel  next 
to the switch knob  up  to 
adjust  instrument  panel  lights. Rotate the thumb  wheel  up 
to the first  notch to return  the  radio  display  and  gearshift 
indicator  display 
to full intensity when  the  headlamps  or 
parking  lamps are 
on. 
Rotate the thumb wheel up  to the  second notch to 
activate the interior  dome lamps. 
You  can switch  your headlamps from  high to low  beam 
by  pulling 
on the turn  signalhigh  beam lever. 
A circuit  breaker protects your headlamps.  If  you have 
an electrical overload, your headlamps  will flicker  on 
and off. Have  your headlamp wiring checked right away 
if  this happens. 
Headlamps On Reminder 
A buzzer  will sound when your headlamps  are turned on 
and your ignition  is in OFF, LOCK  or ACCESSORY. 
If 
you need  to use  your headlamps when the ignition 
switch is  in 
OFF, LOCK or ACCESSORY,  the buzzer 
can  be  turned off  by turning the  thumb wheel  next  to the 
parking  lampheadlamp  switch all the way down. 
Daytime  Running  Lamps (If Equipped) 
Daytime Running Lamps (DRL)  can make  it easier  for 
others 
to see  the front  of your vehicle during the  day. 
DRL can be helpful  in many different driving 
conditions, but they can  be especially helpful  in the 
short periods after dawn and  before sunset. 
The  DRL system  will make your headlamps come 
on at 
a  reduced brightness when: 
0 The ignition is on, 
The headlamp switch is  off and 
0 The parking brake is released. 
If your vehicle was first  sold, when  new,  in  Canada, 
your headlamps  will come 
on at reduced brightness. 
2-36   

Downloaded from www.Manualslib.com manuals search engine If your  vehicle  was first  sold, when  new,  in the United 
States,  your  vehicle  may be equipped  with DRL.  If your 
vehicle  has DRL, 
you will  see the the  DRL  indicator 
light 
on your  instrument  panel  and your  low-beam 
headlamps  will come 
on at reduced  brightness. 
When  the  DRL  are  on,  only your  headlamps  will be on. 
The  taillamps,  sidemarker  and other  lamps  won’t be on. 
Your  instrument  panel  won’t  be lit up  either, 
When  it  begins to  get dark, your DRL  indicator  light 
is  a  reminder 
to turn  your  headlamp  switch on. The 
other  lamps  that come  on  with your  headlamps  will also 
come  on. 
When-you  turn off the  headlamp  switch,  the regular 
lamps  will go 
off, and  your  headlamps  will change  to 
the  reduced  brightness  of DRL. 
To  idle  your  vehicle with  the  engine  on  and the  DRL 
off, 
set the  parking  brake.  The  DRL  will stay  off until you 
release  the parking  brake. 
As with any  vehicle, you should turn  on the regular 
headlamp  system  when you  need it. 
Dome Lamps 
The dome  lamps will come  on when you open the  doors. 
You can  also turn the dome  lamps on by rotating  the 
thumb  wheel, located next 
to the headlamp  knob,  all 
the  way  up 
to the second notch. In this position,  the 
dome  lamps  will remain on whether the  doors  are 
opened  or closed. 
You can  use the  dome 
lamp  button, located 
below the  headlamp  knob, 
to  set the  dome  lamps  to 
automatically  come 
on 
when the  doors  are open, 
or  to remain  off. 
To  turn 
the lamps  off, push  the button  once. With the 
button  in this position,  the  dome  lamps will remain off 
when the  doors  are  open.  To return the lamps 
to 
automatic  operation,  push the button again and return it 
to the out  position. With the button  in this  position,  the 
dome  lamps  will come 
on when you open the  doors. 
The  delayed  entry  will allow  you 
to enter or exit  your 
vehicle  with the lamps  staying 
on for  about 20 seconds, 
after  the door  is closed 
or ignition is  cycled. 
2-37   

Downloaded from www.Manualslib.com manuals search engine Here are some tips on  night driving. 
0 
0 
0 
0 
0 
0 
0 
Drive defensively. 
Don’t drink and  drive. 
Adjust your inside rearview  mirror to  reduce the 
glare from headlamps behind you. 
Since  you can’t  see as well,  you  may  need  to 
slow down and  keep more  space  between 
you 
and other vehicles. 
Slow down, especially  on higher speed roads. 
Your 
headlamps can  light up only so much  road  ahead. 
In  remote areas, watch  for  animals. 
If you’re tired, pull off the road in a safe place 
and rest. 
Night Vision 
No one  can see as  well  at night as in the daytime.  But as 
we  get  older these  differences increase. 
A 50-year-old 
driver  may require  at least twice 
as much  light to see the 
same thing  at  night as  a 20-year-old. 
What  you do 
in the daytime  can  also affect your night 
vision. For  example, 
if you spend the day in bright 
sunshine 
you are wise to wear  sunglasses. Your eyes will  have less trouble adjusting 
to night. But if you’re 
driving, don’t wear sunglasses at night. They  may cut 
down 
on glare from headlamps, but they also make a 
lot of things invisible. 
You  can be temporarily blinded  by approaching 
headlamps. 
It can take  a second  or two,  or even several 
seconds,  for your  eyes to readjust  to 
the dark. When  you 
are faced 
with severe glare (as  from a driver who 
doesn’t lower the  high beams,  or 
a vehicle with 
misaimed headlamps),  slow down  a little.  Avoid  staring 
directly into  the approaching headlamps. 
Keep your windshield  and  all the glass  on your vehicle 
clean 
-- inside and  out.  Glare at night  is  made  much 
worse  by dirt  on the glass. Even the inside  of the glass 
can build  up a film caused  by dust.  Dirty  glass makes 
lights dazzle  and flash more than clean glass would, 
making the pupils 
of your  eyes contract repeatedly. 
Remember that  your headlamps light  up far  less 
of a 
roadway  when  you  are in a turn or curve. Keep your 
eyes  moving; that  way,  it’s easier  to  pick out dimly 
lighted objects.  Just as your headlamps should  be 
checked regularly for proper  aim, 
so should your  eyes 
be  examined regularly.  Some drivers suffer from  night 
blindness 
-- the inability to see in dim light -- and aren’t 
even aware 
of it. 
4-14   

Downloaded from www.Manualslib.com manuals search engine Hydroplaning 
Hydroplaning  is dangerous. So much water  can  build up 
under your tires that they can  actually  ride on the water. 
This  can  happen if the  road  is wet  enough  and you’re 
going  fast  enough.  When  your vehicle 
is hydroplaning, 
it  has  little  or no  contact  with the  road. 
Hydroplaning  doesn’t happen  often.  But it can 
if your 
tires haven’t much tread  or if the  pressure in one or 
more  is  low. It can happen  if a lot of water is standing on 
the road. If you can  see  reflections  from  trees,  telephone 
poles  or  other  vehicles,  and  raindrops  “dimple”  the 
water’s  surface,  there could  be  hydroplaning. 
Hydroplaning  usually happens  at  higher speeds.  There 
just  isn’t  a hard and  fast  rule  about  hydroplaning.  The 
best  advice  is to  slow  down when  it 
is raining. 
Driving  Through  Deep  Standing  Water 
I 
NOTICE: 
If you  drive  too  quickly  through  deep puddles 
or  standing  water,  water  can come 
in through 
your  engine’s  air intake  and  badly  damage  your 
engine.  Never  drive  through  water  that  is slightly 
lower  than  the  underbody 
of your  vehicle. If you 
can’t  avoid  deep  puddles  or standing  water,  drive 
through  them  very  slowly. 
Some  Other  Rainy  Weather  Tips 
0 
0 Turn  on your  low-beam  headlamps -- not just 
your  parking  lamps 
-- to help make  you more 
visible  to others. 
Besides  slowing  down,  allow some  extra  following 
distance.  And be  especially  careful  when you pass 
another  vehicle.  Allow yourself more  clear room 
ahead,  and 
be prepared to have your view restricted 
by  road spray. 
Have  good tires  with proper  tread depth.  (See 
“Tires”  in the  Index.) 
4-17   

Downloaded from www.Manualslib.com manuals search engine i 
A CAUTION: 
Batteries have acid that can burn  you ana  gas 
that  can explode.  You can be badly  hurt if  you 
aren’t  careful.  See “Jump  Starting”  in the  Index 
for tips  on  working  around a battery  without 
getting  hurt. 
Contact  your  dealer to learn how to prepare  your vehicle 
for  longer  storage  periods. 
Also, for your  audio  system,  see  “Theft-Deterrent 
Feature” 
in the Index. 
Bulb  Replacement 
Before you replace  any  bulbs,  be sure  that all the lamps 
are 
off and  the engine  isn’t running.  See “Replacement 
Bulbs” 
in the index  for the  proper  types of bulbs to use. 
Halogen Bulbs 
’ A CAUTION: I I 
Halogen bulbs have pressurized gas inside  and 
can  burst  if  you  drop 
or scratch  the  bulb. You or 
others  could be injured.  Be sure  to  read  and 
follow  the  instructions  on the  bulb  package. 
I 
Headlamps 
You have  either  a  sealed beam  headlamp  system or  a 
composite  system. 
6-3 1   

Downloaded from www.Manualslib.com manuals search engine Lamp and Bulb Data 
LAMP OR BULB 
HEADLAMPS 
2 Headlamp System (Sealed  Beam  System) 
Low/High Beam 
4 Headlamp  System (Composite  Headlamp System) 
Low/High Beam 
High Beam 
LAMP  OR BULB 
EXTERIOR 
Front Sidemarker Lamp 
Front Park  and Turn  Lamp 
Rear  Parking  Lamp 
Rear  Stop and Turn 
Lamp 
Back-up  Lamp 
Back-up  Lamp 
Rear  Park,  Stop  and Turn 
Lamp 
CHMSL 
License  Plate Lamp 
Underhood 
Lamp 
Reel  Lamp 
POWER  RATING 
TRADE  NO. AT 
12.8V, WATTS 
H6054 
6052 
9005 
TRADE NO. 
194 
2357NA 
3057 
3057 
3156 
1156 
1157 
92 1 
I94 
232 
232 
35/65 
51 
60 
2 
4 
2 
2 
2 
6-69