39-98
Drive flange oil seals,
replacing
Rear final drive installed
- Observe general repair instructions Page 00
-
11
.
Note:
The exhaust system only needs to be removed if
the left oil seal is replaced.
Special tools, testers and auxiliary items
Drift 2062
Drip tray V.A.G 1306
Universal support V.A.G 1359/2
Engine/transmission jack V.A.G 1383 A
Pa
ge 1 of 4 Drive flan
ge oil seals, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.13
39-99
Removing
- Remove rear section of exhaust system
(rearward of exhaust pipe clamp(s)):
Repair Manual, 2.7 Liter V6 5V BiTurbo
Engine Mechanical, Engine Code(s): APB, Repair Group 26
- Detach left and right-hand drive axles from rear
final drive, and lay to one side:
Repair Manual, Suspension, Wheels,
Steering, Repair Group 42.
- Remove drive flange. To loosen securing bolt, screw two bolts into
drive flange and hold with bar to prevent it from turning.
- Place drip tray V.A.G 1306 underneath and drain transmission oil.
- Pull out drive flange using the bolts already screwed in.
Pa
ge 2 of 4 Drive flan
ge oil seals, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.13
