35-18
14 -
Needle bearing for 2nd speed sliding gear
SplitOil with gear oil before installing
15 -
2nd speed sliding gear Pressing off Fig. 12Before installing, fit spring and slide needle
bearing onto hollow shaft After installing, check axial clearance with
a feeler gauge (0.15-0.35 mm)
16 -
Synchro-ring for 2nd gear Coated with MolybdenumChecking for wear Fig. 2
, Page 35
-9
Pa
ge 7 of 21 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.2
