Page 1 of 19
50-1
 
  
Body, front Lock carrier with attachments, removing 
and installing
 
1 - 
Hex bolt (6x) 
45 Nm (33 ft lb)
2 - 
Hex bolt 45 Nm (33 ft lb)
3 - 
Hex bolt (4x) 10 Nm (7 ft lb)
4 - 
Hex bolts (2x) 10 Nm (7 ft lb)
5 - 
Access hole for special tool For service position, attach special tool 
3369 here 
6 - 
Cowl attachment hole Attachment for service position
Pa
ge 1 of 19 Bod
y, front
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.50.1 
     
        
        Page 7 of 19
50-7
 
  
Lock carrier service position
 
Notes: 
 
Do not remove noise insulation. Loosen only 
front quick-release screws   page 50
-18
 . 
 Bumper removed
1 - 
Combination bolt 
45 Nm (33 ft lb)
2 - 
Combination bolt 45 Nm (33 ft lb)
3 - 
Combination bolt 10 Nm (7 ft lb)
4 - 
Combination bolt 10 Nm (7 ft lb)
5 - 
Access hole for special tool For service position, attach special tool 
3369 here 
6 - 
Cowl attachment hole Attachment for service position
Pa
ge 7 of 19 Bod
y, front
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.50.1 
     
        
        Page 8 of 19
50-8
 
  
Note:  
After assembly of the lock carrier, check headlight 
positioning and adjust if necessary.  7 - 
Lock carrier 
For service position
 - Screw special tool 3369 into threaded 
bore -5- on left side   Fig. 1
 
 - Remove left and right mounting screws -
1-. 
 - Remove mounting bolts -3- and -4- and 
pull lock carrier -7- forward. 
  - Secure lock carrier   Fig. 2
 .
8 - 
Hood seal 
9 - 
Hood lock cable 
10 - 
Hole in side panel 
Pa
ge 8 of 19 Bod
y, front
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.50.1 
     
        
        Page 18 of 19
50-18
 
  
Noise insulation panel, assembly overview
 
1 - 
Quick-release screw 
Remove only this quick release screw for 
service position Three pieces2 Nm (18 in. lb)
2 - 
Front noise insulation 
3 - 
Quick release screw Three piecesIf rear noise insulation panel is also - 4 - 
being installed, then longer quick-release 
screws must be used 2 Nm (18 in. lb)
4 - 
Rear noise insulation panel Only installed for certain engine typesInstalled over noise insulation panel -2-
5 - 
Quick-release screw Two pieces2 Nm (18 in. lb)
Pa
ge 18 of 19 Bod
y, front
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.50.1