Page 9 of 63
24-83
      
Checking oxygen sensor adaptation values 
and control  
     
- Press -C- button.Basic Setting 
Q
Input displa
y group number XXX
    
When indicated on display:  
-  Press buttons -0-, -3- and -3- to select "display group number 033" and 
press -Q- button to confirm input. 
System in Basic Setting 33  
1 
2 
3 
4
    
When indicated on display:  
-  Check oxygen sensor control in display fields 1 and 3.
Pa
ge 9 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 10 of 63
24-84
 
   1   2   3   4  
Display group 033: Oxygen sensor control before catalytic converter  
Display  
xx.x %  x.xxx volts  
xx.x %   x.xxx V  
Indicated  
Oxygen sensor control
Bank1  Oxygen sensor voltage 
bank 1  Oxygen sensor control
Bank2  Oxygen sensor voltage 
bank 2  
Functional 
range  -25.0 to 25.0 %   0.100 to 1.000 V  
-25.0 to 25.0 %   0.100 to 1.000 V  
  
Specified 
value  Value must fluctuate by 
at least 2 % in the range 
10.0 to 10.0 %  Value must fluctuate 
approx. 0.3 V in the 
range 0.100 to 1.000 
volts  Value must fluctuate by 
at least 2 % in the range 
10.0 to 10.0 %  Value must fluctuate 
approx. 0.3 V in the 
range 0.100 to 1.000 
volts  
Notes  
If specified value is not 
obtained  Page 24
-85
   
  
If specified value is not 
obtained  Page 24
-85
   
  
Pa
ge 10 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 11 of 63
24-85
 Evaluation display group 033  Display field: 1 / 3  
Possible cause  
Corrective action  
Values in range: 
-10.0 to -25.0 %   
Oxygen sensor heating faulty- Check oxygen sensor heating   Page 
24
-116
 
or  
Values in range:   
Open circuit in wires between oxygen sensor 
and control module - Check primary voltage   Page 24
-89
10.0 to 25.0 %  
or  
Value does not fluctuate 
by at least 2 %   
Short circuit to Ground (GND) or B+ between 
oxygen sensor and control module - Check oxygen sensor wires bank 1   
Page 24
-90
 
- Check oxygen sensor wires bank 2   
Page 24
-91
 
  
 
False air in intake area- Check intake system for leaks and 
repair false air   Page 24
-64
 
  
 
Fuel pressure too low or too high- Check fuel pressure regulator   Page 
24
-30
 
  
 
Fuel return line is kinked or clogged- Check fuel return line.
Pa
ge 11 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 12 of 63

24-86
      
- Press -C- button. 
     
-  Press buttons -0-, -3- and -2- to select "display 
group number 032" and press -Q- button to 
confirm input. System in Basic Setting 32  
1 
2 
3 
4
    
When indicated on display:  
-  Check oxygen sensor control in display fields 1 to 4:
  
Display fields  
  
1   2   3   4  
Display group 032: Oxygen sensor adaptation values before catalytic converter  
Display  
xx.x %  
xx.x %  
xx.x %  
xx.x %  
Indicated  
Oxygen sensor 
adaptation value 
Bank 1 at idle  
(additive)  Oxygen sensor adaptation 
value bank 1 at partial 
throttle 
(multiple)  Oxygen sensor 
adaptation value 
Bank 2 at idle  
(additive)  Oxygen sensor adaptation 
value bank 2 at partial 
throttle 
(multiple)  
Functional 
range  -25.0 to 25.0 %  
-25.0 to 25.0 %  
-25.0 to 25.0 %  
  -25.0 to 25.0 %  
  
Specified 
value  -10.0 to 10.0 %  
can fluctuate 
slightly  -10.0 to 10.0 %  
can fluctuate slightly  -10.0 to 10.0 %  
can fluctuate 
slightly  -10.0 to 10.0 %  
can fluctuate slightly  
Notes  
If specified value is not obtained   Page 24
-87
   
Pa
ge 12 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 13 of 63
24-87
 Evaluation display group 032  Display field: 
1 / 3 or 2 / 4  
Possible cause  
Corrective action  
Oxygen sensor 
adaptation value in 
range: 
-10.0 to .-25.0 %   
Oil thinning- Oil change or perform swift country road 
test 
  
 High oil consumption  
  
 Mass Air Flow (MAF) sensor faulty- Mass Air Flow (MAF) sensor, checking 
 
 Page 24
-56
 
  
 
Evaporative Emission (EVAP) canister purge 
regulator valve remains stuck in open position - Check Evaporative Emission (EVAP) 
Canister Purge Regulator Valve   Page 24
-
128
 
  
 
Fuel pressure too high- Check fuel pressure regulator   Page 24
-
30
 
  
 
Fuel return line is kinked or clogged.- Check fuel return line.
  
 Fuel injector does not close- Check fuel injectors   Page 24
-36Pa
ge 13 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 14 of 63
24-88
 Evaluation display group 032  Display field: 
1 / 3 or 2 / 4  
Possible cause  
Corrective action  
Oxygen sensor 
adaptation value in range: 
10.0 to 25.0 %   
False air in intake area- Check intake system for leaks and repair false 
air. 
 Page 24
-64
 . 
  
 
Fuel pressure too low- Check fuel pressure regulator   Page 24
-30
  
 
Mass Air Flow (MAF) sensor faulty- Mass Air Flow (MAF) sensor, checking 
 
 Page 24
-56
 
  
 
Oxygen sensor heating faulty
 Oxygen sensor faulty- Check oxygen sensor heating   Page 24
-116
  
 
Fuel injector does not open or opens 
only partially - Check fuel injectors   Page 24
-36
  
 
Evaporative Emission (EVAP) Canister 
Purge Regulator Valve sticks - Check Evaporative Emission (EVAP) Canister 
Purge Regulator Valve   Page 24
-128
 
  
 
Ignition coil or spark plug faulty- Check ignition coils   Page 28
-7
Pa
ge 14 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 15 of 63
24-89
      
Checking primary voltage  
      Component location of harness connectors   
Overview of component locations, page   Page 
24
-5   
     
Note:  
     Coolant reservoir screws must be removed and 
coolant reservoir must be placed to side in order 
to access this harness connector. The coolant 
hoses can remain connected. 
     
Test requirement:  
     
Fuse for oxygen sensor are OK 
     
-  Disconnect 4-pin harness connector leading to 
respective oxygen sensor. 
    
If specified value is not obtained:  -  Connect multimeter between terminal 3 and 4 for voltage 
measurement. 
-  Switch ignition on.
 
Specification: 0.400 to 0.500 V
-  Switch ignition off.
- 
Check oxygen sensor wires   Bank 1, page   Page 24
-90
 or   Bank Pa
ge 15 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3 
     
        
        Page 16 of 63
2, page   Page 24
-91
 . 
Pa
ge 16 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3