If the connector is disconnected from the ECM or the battery is disconnected, all adaptation values in the control module 
are erased. DTC memory content will remain intact however. If the engine is started after this, a rough, uneven idle can 
result. In this case, engine must be allowed to run at idle for a few minutes until adaptation procedure has been 
completed. 
 After erasing DTC memory   Page 01
-15
 readiness code must be re-generated   Page 01
-82
 .
Pa
ge 7 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
01-50
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1545   17953   Throttle valve control  
Malfunction 
2) 3)
  - Check throttle valve control module   Page 24
-141
P1558   17966   Throttle drive (power accelerator actuation) -G186-  
Electrical malfunction in circuit 
2) 3)
    
P1559   17967   Throttle valve control module -J338-  
Malfunction in basic setting 
1) 2)
  - Perform adaptation   Page 24
-142
P1564   17972   Throttle valve control module -J338-  
Voltage too low during basic setting  - Charge battery, repeat basic setting
P1565   17973   Throttle valve control module -J338-  
Lower impact still not reached 
2) 3)
  - Check throttle valve control module   Page 24
-141
P1568   17976   Throttle valve control module -J338-  
Mechanical malfunction 
2) 3)
    
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
2) For these malfunctions, ECM switches on the EPC warning lamp in instrument cluster. Significance of EPC warning lamp   
Page 24
-136
 .  
3) For these malfunctions, the Engine Control Module (ECM) switches on the Malfunction Indicator Lamp (MIL) in the 
instrument cluster immediately after recognizing the malfunction. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 46 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2