Page 20 of 40
19-17
Radiator, removing and installing
Removing
- Remove front bumper.
Repair Manual, Body Exterior, Repair Group
63
- Drain coolant at drain plug (arrow) page 19
-11
.
Vehicles with automatic transmission - Disconnect coolant hoses at radiator, unhinge clamp from connection
flange (arrow).
- Disconnect connector from temperature switch at bottom-left of
radiator.
Pa
ge 20 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
Page 21 of 40
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 37
- Remove ATF lines from radiator.
Pa
ge 21 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
Page 23 of 40
19-19
All models
Installing
Installation is the reverse of removal, noting the following:
Vehicles with automatic transmission
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 37
Tightening torques - Release both radiator retaining bolts, pull up and remove (arrows).
- Tilt radiator toward front, lift up and remove.
- Fill up coolant page 19
-11
.
- Check ATF level.Component
Tightening torque
Condenser to radiator 10 Nm (7 ft lb)
Coolant line to radiator 10 Nm (7 ft lb)
Pa
ge 23 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
