28-18
Checking voltage supply
Fuse for ignition coils OK
- Disconnect white connector on connector
bracket page 28
-1 .
- Switch ignition on.
If the specified values are not obtained: - Switch Fluke 83 multimeter to voltage range and connect in sequence
between Ground (GND) and all three terminals of the connector.
Specified value: approx. battery voltage
- Check for open circuit using wiring diagram, repair as necessary, also
check fuses.
Pa
ge 4 of 4 I
gnition coils, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.28.4
