39-177
Drive pinion, adjusting
Notes:
Before adjusting drive pinion, adjust ring gear
(determine total shim thickness "S" total" for
adjustment shims "S1" + "S2") page 39
-186
.
Drive pinion only has to be adjusted again if
gear set, tapered roller bearings for drive pinion
or final drive housing was replaced. Adjustment
overview page 39
-170
.
Do not grease new tapered roller bearings
additionally for friction torque measurement.
The bearings are already greased with a
special oil from the factory.
Determining Shim "S3"
(adjust preload of tapered roller bearing for drive
pinion)
- Clamp final drive into engine and transmission
assembly stand page 39
-123
.
Note: - Pull large tapered roller bearing outer race into housing.
Pa
ge 13 of 38 Drive
pinion and rin
g gear, ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.15
