39-9
Note: - Remove driveshaft -1- from transmission and rest it on heat shield -2-.
- Secure driveshaft to fuel line bracket -3- using wire (arrows).
- Place VAG1306 drip tray underneath and drain transmission oil.
- Place VAG1306 drip tray underneath end cover.
Oil will run out when removing cap -B-
- Remove circlip -A-.
- Screw M8 bolt into thread of cap -B-.
- Pull out cap -B- using bolt.
Pa
ge 4 of 7 Drive flan
ge and driveshaft seals, re
placin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.2
39-12
- Top off and check transmission oil level Page
34
-38
.
- Align exhaust system free of stress.
Repair Manual, Engine Mechanical, Repair
Group 26
Tightening torques
Component
Tightening
torque
Driveshaft to transmission 55 Nm (41 ft
lb)
Heat shield for driveshaft to
Torsen differential cover 25 Nm (18 ft
lb)
Pa
ge 7 of 7 Drive flan
ge and driveshaft seals, re
placin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.2
