NON-SIDE OPENING ELEMENTS
Luggage compartment lid
48PLuggage compartment lid
INTRODUCTION
The part is delivered by the Parts Department
assembled with:
– the casing (polyester composite),
– the inner metal frame,
– the outer panel (Xénoy).
See Workshop Repair Manual 502 for the repair
methods for plastics.
REMOVAL
with hinges (detailed method below),
without hinges, remove only bolts (A) and (B).
Disconnect the electric supply cable in the left hand
rear wing lining.Remove:
– the luggage compartment lid interior trim (see
section 73-A),
– the emergency spare wheel protector,
– the emergency spare wheel,
– the upper extension on the left hand rear wing panel
(see section 56-A),
– the left hand lower embellisher strip on the luggage
compartment lid (see section 55-H),
– the left hand rear wing extender
(see section 55-D),
– the right hand lower embellisher strip on the luggage
compartment lid (see section 55-H),
– the electric supply cable
(see section 73-A),
– the windscreen wiper arm (see section 56-B),
– the windscreen wiper stop,
– the wiper motor,
– the tailgate closure lock
(see section 52-A),
– the lower tailgate seal,
– the luggage compartment lid handle and lock (see
section 52-A and B),
– the lower balancer,
– the tailgate surround seal,
– the rear floor lining,
– the left hand rear wing interior trim,
– the five mounting bolts (A) on the lower hinge.
PRF4803
17514R
48-3
D
