LOWER STRUCTURE
Acceleration sensor mounting
41SAcceleration sensor mounting
INTRODUCTION
The replacement of this part is a complementary
operation to the replacement of the centre floor.
For standardisation purposes, the centre floor is
delivered by the Parts Department without the
acceleration sensor mounting.
In the operation described below, only descriptions of
the joints specific to the part concerned are given.
The information on the additional parts will be dealt
with in their appropriate chapters (see contents).
COMPOSITION OF THE PART FROM THE PARTS
DEPARTMENT
Part delivered alone.
PARTS CONCERNED (thickness in mm):
1
2
3
4
5Acceleration sensor mounting
Front seat height adjuster
Front seat height adjuster reinforcement
Centre floor
Tunnel stiffener 1.2
1.5
1.5
1
1
41-16
Z
