Page 2 of 34
AIR CONDITIONING AND AUDIO
92
AUTOMATIC AIR CONDITIONING CONTROLS
The automatic air conditioning automatically maintains the
set temperature.
This air conditioning features automatic fan speed and air
flow control which automatically selects the most suitable
fan speed and air flow to control the temperature. The
ignition key must be in the “ON” position.NOTICE
To prevent the battery from being discharged, do not
leave the air conditioning on longer than necessary
when the engine is not running.
Page 16 of 34

AIR CONDITIONING AND AUDIO
106
Using your audio system: some basics
This section describes some of the basic features of the Lexus
audio system. Some information may not pertain to your
system.
Your audio system works when the ignition key is in the “ACC”
or “ON” position.
NOTICE
To prevent the battery from being discharged, do not
leave the car audio on longer than necessary when the
engine is not running.
(a) Turning the system on and off
Push this knob to turn the audio system on and off. Turn
this knob to adjust the volume.
The system turns on in the last, mode used.
Push “AM”, “FM1 / 2”, “TAPE” or “CD” to turn on that
mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or disc is not set, the cassette player or compact disc
player does not turn on.
You can turn off the cassette player by ejecting the cassette
tape. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape. If another function was previously playing, it will come on
again.
Page 20 of 34

AIR CONDITIONING AND AUDIO
11 0(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1−6) and hold
it until a beep is heard. This sets the station to the button
and the button number (1−6) appears on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the
desired station using one of the following methods.
Preset tuning: Push the button (1−6) for the station you want.
The button number (1−6) and station frequency appear on the
display.
Manual tuning: Push the “TUNE SEEK” button for no longer
than 0.5 seconds. Each time you push the button, the radio will
step up or down to another frequency.
Seek tuning: Push the “TUNE SEEK” button and hold it until
you hear a beep. The radio will begin seeking up or down for
a station of the nearest frequency and will stop on reception.
Each time you push the button, the stations will be searched
out one after another.