ELECTRICAL
1
SPECIFICATIONS, TORQUE TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Generator
Generator mounting bracket to cylinder head 34............................................
Generator to mounting bracket 24..................................................................
Generator shaft nut 35....................................................................................
Generator through bolts 5..............................................................................
Generator rectifier bolts 3,5.............................................................................
Amplifier module screws 1,2............................................................................
Amplifier heat sink screws 1,2.........................................................................
Auxiliary driving lamp mounting bolts 15.........................................................
Distributor clampbolt 20..................................................................................
Distributor pick-up bearing plate support pillars 1,2.........................................
Distributor pick-up barrel nuts 1,2....................................................................
Distributor vacuum unit 2...............................................................................
Torque values below cover all screws and bolts used, unless specified otherwise.
METRIC Nm
M5 6......................................................................................................
M6 9......................................................................................................
M8 25.....................................................................................................
M10 45...................................................................................................
M12 90...................................................................................................
M14 105..................................................................................................
M16 180..................................................................................................
UNC / UNF
1/4 9......................................................................................................
5/16 24...................................................................................................
3/8 39.....................................................................................................
7/16 78...................................................................................................
1/2 90.....................................................................................................
5/8 136....................................................................................................
