ELECTRICAL
37
REPAIR COOLANT TEMPERATURE AND FUEL GAUGES
Service repair no - 88.25.14 - Coolant temperature
gauge
Service repair no - 88.25.26 - Fuel gauge
Remove
1.Remove instrument cowl.
See Instrument
cowl and illumination board
2.Remove speedometer trip reset button sleeve.
3.Remove instrument face plate.
Coolant temperature gauge
4.Remove circuit board,See Circuit board
5.Remove 3 screws securing coolant temperature
gauge to binnacle, remove gauge.
Fuel gauge
6.Remove 3 screws securing fuel gauge to
binnacle, remove gauge.
Refit
7.Reverse removal procedure.SPEEDOMETER TRANSDUCER
Service repair no - 88.30.14
Remove
1.Position vehicle on ramp and chock wheels.
2.Raise ramp.
3.Disconnect multiplug from transducer.
4.Remove bolt securing transducer, remove
transducer.
Refit
5.Reverse removal procedure.
ELECTRICAL
41
REPAIR COOLANT TEMPERATURE TRANSMITTER - V8i
Service repair no - 26.10.02
Remove
1.Disconnect battery negative lead.
2.Disconnect lead from transmitter.
3.Remove transmitter, discard sealing washer if
fitted.
Refit
4.Coat threads of replacement transmitter with
Loctite 572.
5.Fit a new sealing washer to transmitter.
6.Fit transmitter, connect lead.
7.Top-up cooling system.HEATED FRONT SCREEN
Heated front screen will operate when switch is
operated, with engine running. Timer unit will provide
a preset time cycle of 7« minutes±20%.
To identify timer unit.
See Electrical Trouble
Shooting Manual.Electrical Troubleshooting
Manual
Switching OFF ignition, or further operation of heated
front screen switch during cycle will switch off screen
and cancel, reset and switch off timer unit.
