CHASSIS AND BODY
43
REPAIR SUN BLIND ASSEMBLY
Service repair no - 76.82.78
Remove
1.Open sunroof to the tilt position.
2.Remove the trim finisher from the sunroof
surround.
3.Release the headlining locally to access under
clamping frame of the sunroof.
4.Lever forward and upward the rear leg of 3
retaining clips to release sun blind roll assembly.
Refit
5.Ensure front leg of retaining clips are located.
6.Push in rear leg of retaining clip.
7.Reverse removal procedure.CENTRE CONSOLE
Service repair no - 76.52.02
Remove
1.Disconnect battery earth lead.
2.Release tranfer gear lever gaiter from console.
3.Remove transfer gear lever gaiter and knob
assembly.
4.Release gear selector lever gaiter from centre
console.
5.Remove gear selector lever gaiter and knob
assembly.
6.Remove centre console rubber mat.
CHASSIS AND BODY
55
REPAIR Refit
7.Reverse removal procedure.
8.Tighten Torx screws securing seat to
29 Nm (21
lbf ft)
.
9.Tighten bolts securing seat slides to
22 Nm (16
lbf ft)
.
10.Tighten Torx screw securing seat belt to
32 Nm
(24 lbf ft)
.INTERIOR MIRROR (96 MODELS)
Service repair no - 76.10.51 - Manual
Service repair no - 76.10.54 - Auto dimming
Remove
NOTE: To remove manual mirror, follow
step 8 only.
1.Remove headlining front pocket.
2.Release left hand sun visor from clip and move
aside.
3.Release sun visor clip screw cover.
4.Remove clip securing screw and remove clip.
5.Remove 2 screws securing sunroof ECU and
move ECU aside.
6.Locate mirror multiplug, remove clip and
disconnect multiplug.
7.Remove tape securing harness (behind
headlining).
8.Release mirror from screen by applying sharp
downward pressure to the base.
CAUTION: Do not use tools to assist
removal. Mirror base should be moved in
direction of arrow, parallel to windscreen.
9.Release harness from behind headlining and
remove mirror.
