1995 AUDI S4 01E Transmission Bearing For Torsen Differential Service Workshop Manual

Page 1 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-97
 
     
Bearings for Torsen 
differential, servicing 
     
Special tools, testers and auxiliary items 
required:   
     
Thrust plate VW 401
     Thrust plate VW 402
     Press tool VW 407

Page 2 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual      
Counter support e.g. Kukko 22/1
Pa
ge 2 of 7 Bearin
gs for Torsen differential, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.7

Page 3 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-98
 
  
1 - 
Ball bearing for Torsen differential 
Pressing off   Fig. 1Pressing on   Fig. 2
2 - 
Torsen differential 
Can only be serviced by manufacturer
3 - 
Inner race for needle bearing for To

Page 4 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-99
 
  
Note:  
The shims for the Torsen differential must be re-
determined after replacing the following parts   
Page 34
-85
 : 
 End cove
r
 Inner race for needle bearing
 Torsen differential

Page 5 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-100
 
    
Fig. 1  Pressing off ball bearing for Torsen differential
A - Separating device 22-115 mm, e.g. Kukko 17/2
    
Fig. 2  Pressing on ball bearing for Torsen differential
Press piece 3118

Page 6 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-101
 
    
Fig. 3  Pulling off inner race for needle bearing for Torsen 
differential 
A - Inner race
B - Separating device 22-115 mm, e.g. Kukko 17/2
    
Fig. 4  Pressing on inner race for needle

Page 7 of 7

AUDI S4 1995 B5 / 1.G 01E Transmission Bearing For Torsen Differential Service Workshop Manual 34-102
 
    
Fig. 5  Pulling out needle bearing for drive pinion/Torsen 
differential 
A - Internal puller 30-37 mm, e.g. Kukko 21/5
B - Counter support, e.g. Kukko 22/1
    
Fig. 6  Pressing in need