42-110
 
  
Wheel bearing housing, servicing
 
1 - 
Wheel bearing housing 
Do not grease bearing seat in wheel 
bearing housing before pressing in wheel 
bearing After replacing, check and if necessary 
adjust wheel alignment 
2 - 
Clamping sleeve Always replaceLeft and right-sides identicalGrease all around with brake cylinder paste 
before inserting into wheel bearing housingPress into wheel bearing housing until fully 
seated 
3 - 
ABS wheel speed sensor To remove, pull outDo not install until drive axle has been 
installed To install, press in by hand until fully 
seated 
Pa
ge 6 of 13 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.8