01-71
Code Control Module
(function 07)
If control module does not indicate coding
corresponding to vehicle, or if control module has
been replaced, code it as follows.
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Ignition must remain switched on for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -7- to select "Code control module" and press -
Q- button to confirm input.
Code Control Module
Q
Enter code number XXXXX
(0-32000
)
When indicated on display:
Clarification of coding - Input control module coding according to code table Page 01
-73
.
XX Country/Exhaust
X Drive/Additional Functions
X Transmission
Pa
ge 1 of 4 Code Control Module
(function 07
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.5
01-72
Coding example
07251
USA LEV
1) (emissions regulations), All
Wheel Drive (AWD) without ESP
2)
, 5
speed Automatic transmission, Audi A4
1) LEV: Abbreviation for Low Emission Vehicle
2) ESP: Abbreviation for Electronic Stability
Program
- Confirm input using the -Q- button.
3B0907551BA
2.8l V6/5V
G
0003
Codin
g 07251
WSC 12345
VAG1551 Scan Tool (ST) display indicates control module identification,
e.g.:
Note:
Function is unknown or cannot be carried out at the moment
When indicated on display:
An unauthorized code number was entered.
-
Press button.
Rapid data transfer
HELP
Select function XX
Indicated on display (function selection):
Pa
ge 3 of 4 Code Control Module
(function 07
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.5
