24-53
Heated Oxygen Sensor
(HO2S) after Three Way
Catalytic Converter (TWC),
checking
Notes:
G130 = O2S behind three way catalytic
converter, bank 1
G131 = O2S behind three way catalytic
converter, bank 2
For functional check of O2S behind three way
catalytic converter -G130- or -G131- Repair
Group 01, Read measuring value block, display
group 041
- Disconnect connector for O2S behind three way
catalytic converter -G130- or- G131- (component
locations page 24
-1 ).
If there is continuity: - Using multimeter (Fluke 83 or equivalent) set for measuring resistance
( ), check for continuity (short circuit) between oxygen sensor
terminals 3 (GND wire) and 4 (signal wire).
Pa
ge 1 of 7 Heated Ox
yg
en Sensor
(HO2S
) after Three Wa
y Catal
ytic Converter
(TWC
), checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.13
