1994 Oldsmobile Cutlass Supreme cooling

Capacities & Specifications
Engine Crankcase
3100 V6 ........................................................................\
.................... 4 quarts
Twin Dual Cam (DOHC) 3.4L V6 .................................................. 5 quarts
When changing filter, up to 0.50 quarts (0.50L) more oil may be needed.
When draininglreplacing converter, more. fluid
may be needed.
Pan Removal and Replacement ....................................................... 4 quarts
Automatic Transaxle
After Complete Overhaul ................................................................. 7 quarts
Automatic Transaxle with Overdrive
When draininglreplacing converter, more fluid may be needed.
Pan Removal and Replacement ....................................................... 6 quarts
After Complete Overhaul
................................................................. 8 quarts
Cooling System
3100 V6
With 4-Speed Automatic Transaxle ............................................. 12.5 quarts 11.8 L
With 4-Speed Automatic Transaxle ............................................. 12.7 quarts 12.0 L
Twin Dual Cam (DOHC) 3.4L V6 3.8
L
4.8 L
3.8 L
6.6 L
5.8 L
7.5 L
!
i

Maintenance Schedule
238
Schedule l
Follow Schedule I if your vehicle is
MAINLY driven under one or more of
the following conditions:
When most trips are less than 4 miles
When most trips are less than 10
(6 lun) .
miles (16 ltm) and outside
temperatures remain below freezing.
When most trips include extended
idling and/or frequent low-speed
operation, as in stop-and-go traffic.
When towing a trailer. (With some
models, you should never tow a
trailer. See
Towing a Trailer in the
Index.)
When operating in dusty areas.
Schedule I should also be followed if
the vehicle is used for delivery service,
police,
taxi or other commercial
applications.
ITEM TO BE SERVICED
Nom See Explanation of Scheduled Maintenance
Services
following Schedules I and 11.
WHEN TO PERFORM
Miles (kilometers) or Months
(whichever occurs first).
I 2 I Chassis Lubrication I Every other oil change. I
I 4 I Engine Accessory Drive Belt Inspection* I Every 30,000 Miles (50 000 lun) or 24 Months. I
I 6 I Cooling System Service" I Every 30,000 Miles (50 000 lun) or 24 Months. I
I
8 I Spark Plug Replacement* I Every 30,000 Miles (50 000 km). I
I 12 I Fuel Tanlc, Cap and Lines Inspection*+ I Every 30,000 Miles (50 000 lun).
~
I
I

Maintenance Schedule
242 ~
Explanation of~scheduled
Mainfenance Services
Following are explanations of the
services listed in Schedule I and
Schedule
11.
The proper fluids and lubricants to use
are listed in Section D. Make sure
whoever services your vehicle
uses
these. All parts should be-replaced and
all necessary repairs done before you or
anyone else drives the vehicle.
ITEM SERVICE
NO.
1. Engine Oil and Filter Change* -
Always use SH or SG Energy
Conserving I1 oils of proper viscosity.
The “SH” or “SG” designation may
be shown alone or in combination
with others, such as “SH/CD,” “SH,
SG, CD,”“SG/CD,” etc. To
determine the preferred viscosity for
your vehicle’s engine (e.g., SAE 5W-
30 or SAE 10W-30), see
Engine Oil
in the Index.
2. Chassis Lubrication - Lubricate
suspension and steering linkage.
Lubricate the transaxle shift linkage,
and parking brake cable guides,
underbody contact points and
linkage.
3. Tire and Wheel Rotation and
Inspection
- For proper wear and
maximum tire life, rotate your tires
following the instructions in this
manual. See
Tires, Inspection 6
Rotation in the hdex. Check the
tires for uneven wear or damage.
If
you see irregular or premature wear,
check the wheel alignment. Check for
damaged wheels also.
Inspection *‘ - Inspect the belt for
cracks, fraying, wear and proper
tension. Replace as needed.
5. Camshaft Timing Belt Inspection
(3.4L Code X engine only) * -
Inspect for cracks, wear or oiliness.
Check tensioner for proper operation.
See the service manual.
(To purchase
4. Engine Accessory Drive Belt
a service manual, see Service
Publications
in the Index.) Replace
parts as needed.
6. Cooling System Service* - Drain,
flush and refill the system with new
or approved recycled. coolant
conforming
to GM Specification
1825M. Keep coolant at the proper
mixture as specified. See
Coolant in
the
Index. This provides proper
freeze and boil protection, corrosion
inhibitor level and maintains proper
engine operating temperature.
Inspect hoses and replace
if they are
cracked, swollen or deteriorated.
Clean the outside of the radiator and
air conditioning condenser. Wash the
pressure cap and neck.
To help ensure proper operation, we
recommend a pressure test of both
the cooling system and the pressure
cap.
7. Transaxle Service - Change both
the fluid and filter .every
15,000 miles
(25
000 lm) if the vehicle is mainly