1994 OLDSMOBILE BRAVADA ECU

A Step Ahead
In 1966, Toronado made front-wheel-
drive news, including Motor Trend’s
“Car
of the Year.” Still breaking new
ground, the 1974 “Toro” became the first
car equipped with a production “air bag.”
Recent Oldsmobile engineering has
created exciting advancements like
the responsive Quad 4 engine. Versions
of
the $-cylinder, 16-valve Quad 4 propelled
Oldsmobiles on roads and racetracks to
new standards
of economy and
performance. Today, the all-wheel-drive security
of SmartTrak in the Oldsmobile Bravada
continues that proud tradition
of
meaningful technology.
ProCarManuals.com

The Security of
Owner Satisfaction
The quality we built into your new
Oldsmobile gives
us the confidence to
back it with the Oldsmobile Edge-the
most comprehensive owner
satisfaction program in the
industry. The Edge gives you
24-hour roadside assistance,
' Bumper-to-Bumper Warranty
protection, even free transportation
while your vehicle is in
for warranty
service. With the Oldsmobile Edge,
we've
pledged to make your ownership
experience a great one.
J. D. Rock
General Manager
ProCarManuals.com

..
3. Pick up the latch plate and pull the
belt across you. Don’t let it get
twisted.
4. Push the latch plate into the buckle
until it clicks.
Pull up on the latch plate to make
sure it is secure.
If the belt isn’t long enough, see
Safety Belt Extender at the end of
this section.
Make sure the release button
on the
buckle is positioned
so you would be
able to unbuckle the safety belt
quickly if you ever had to. The lap
part of the belt should be worn
low and snug on the hips, just touching
the thighs.
In a crash, this applies force
to the strong pelvic bones. And you’d b
less likely to slide under the lap belt. If
you slid under it, the belt would apply
force at your abdomen. This could
cause serious or even fatal injuries. The
shoulder belt should
go over the
shoulder and across the chest. These
parts of the body are best able to take
belt restraining forces.
The safety belt loclts if there’s a sudden
stop or a crash.
Q: What’s wrong with this?
A: The shoulder belt is too loose. It
won’t give nearly as much protection
this way.
ProCarManuals.com

Seats & Restraint Systems
22
Rear Seat Passengers
It’s very important for rear seat
passengers to buckle up! Accident
statistics show that unbelted people in
the rear seat are hurt more often in
crashes than those who are wearing
safety belts.
Rear passengers who aren’t safety
belted can be thrown out
of the vehicle
in a crash. And they can strike others in
the vehicle who are wearing safety belts.
- ~
Rear Seat Outside Passenger
Positions
Lap-Shoulder Belt
The positions next to the windows have
lap-shoulder belts. Here’s
how to wear one properly.
1. Pick up the latch plate and pull the
belt across you. Don’t let
it get
twisted.
2. Push the latch plate into the buckle
until it clicks. Pull up on the latch
plate to make sure it is secure.
When the shoulder belt is pulled out all
the way, it will lock. If it does, let it go
back all the way and start again.
If the belt is not long enough, see
Safety
Belt Extender at the end of this section.
Make sure the release button
on the
buckle is positioned
so you would be
able to unbuckle the safety belt quickly
if you ever had to.
ProCarManuals.com

Seats & Restraint Systems
I Child Restraints
Be sure to follow the instructions for
+he restraint. You may find these
atructions on the restraint itself or in
I a booklet, or both. These restraints use
he belt system in your vehicle, but the
hild
also has to be secured within the
estraint to help reduce the chance of
personal injury. The instructions that
come with the infant or child restraint
will show you how to do that.
ProCarManuals.com

Where to Put the Restraint
Accident statistics show that children
are safer
if they are restrained in the
rear rather than the front seat. We at
General Motors therefore recommend
that you put your child restraint in the
rear seat unless the child is an infant
and you’re the only adult in the vehicle.
l In that case, you might want to secure
the restraint in the front seat where
you
can keep an eye on the baby.
Wherever you install it, be sure to
secure the child restraint properly.
’ Keep in mind that an unsecured child
restraint can move around
in a collision
or sudden stop and injure people in the
~ vehicle. Be sure to properly secure any
’ child restraint in your vehicle - even
~
when no child is in it.
fop Strap
If your child restraint has a top strap, it
should be anchored.
If you need to have an anchor installed,
you can ask your Oldsmobile dealer to
put it in for
you. If you want to install
an anchor yourself, your dealer can tell
you how to do
it.
Securing a Child Restraint in a
Rear Outside Position
You’ll be using the lap-shoulder belt.
See the earlier section about the top
strap
if the child restraint has one.
1. Put the restraint on the seat. Follow
the instructions for the child
restraint.
as the instructions say.
2. Secure the child in the child restraint
3. Pick up the latch plate, and run the
lap and shoulder portions of the
vehicle’s safety belt through or
around the restraint. The child
restraint instructions
will show you
how. If the shoulder belt goes in front
of the child’s face or neck, put it
behind the child restraint.
27
ProCarManuals.com

7. Push and pull the child restraint in
different directions to be sure it is
secure.
To remove the child restraint, just
unbuckle the vehicle’s safety belt and
let it go back all the way. The safety belt
will move freely again and be ready to
work for an adult or larger child
passenger.
Securing a Child Restraint in a
Center Seat Position
When you secure a child restraint in a
center seating position, you’ll be using
the lap belt. But don’t use the rear
center seat, unless the base of the child
restraint is small enough to let you
reach the buclde and latch plate easily.
See the earlier section about the top
strap
if the child restraint has one.
-
1
2
3
. Male the belt as long as possible by
tilting the latch plate and pulling it
along the belt.
. Put the restraint on the seat. Follow
the instructions for the child
restraint.
as the instructions say.
1. Secure the child in the child restraint
29
ProCarManuals.com

Seats & Restraint Systems
30
4. Run the vehicle’s safety belt through
or around the restraint. The child
restraint instructions will show you
how.
release button is positioned
so you
would be able to unbuckle the safety
belt quickly if you ever had to.
6. To tighten the belt, pull its free end
while you push down on the child
restraint.
5. Buckle the belt. Make sure the
7. Push and pull the child restraint in
different directions to be sure it is
secure.
If the child restraint isn’t
secure, turn the latch plate over and
buckle it again. Then see
if it is
secure. If it isn’t, secure the restraint
in a different place in the vehicle and
contact the child restraint maker for
their advice about
how to attach the
child restraint properly.
To remove the child restraint, just
unbuckle the vehicle’s safety belt. It will
be ready to work for an adult or larger
child passenger. Securing a Child Restraint in the
?ight Front Seat
tou‘ll be using the lap-shoulder belt.
See the earlier section about the top
strap
if the child restraint has one.
1. Put the restraint on the seat. Follow
the instructions for the child
restraint.
as the instructions say.
2. Secure the child in the child restraint
ProCarManuals.com