1994 MAZDA MX-5 buttons

AUDIO OPERATION DESCRIPTION Type 1 Five seconds after completing an operation that is shown on the display, the indicator returns to clock u mode. Radio control 1 Headrest speaker control Bass control knob Treble control knob I Manual tuning button Scan tuning button r- button Auto memory tuning button Illustration Operation 1. Press knob to turn power ON/OFF 2. Turn knob clockwise - Volume up Turn knob counterclockwise-Volume down To increase volume, turn HRSP clockwise I 1. Press BASSiTREBLE 2. For more lows, turn BASSRREBLE clockwise For less lows, turn BASSRREBLE counterclockwise 1. Pull BASSiTREBLE 2. For more highs, turn BASSRREBLE clockwise For less highs, turn BASSRREBLE counterclockwise To shift sound to left, turn BALANCE clockwise To shift sound to right, turn BALANCE counterclockwise Press button to change bands AM, FMl, and FM2 modes are alternatively selected as shown When stereophonic broadcasting is received in FM1 or FM2 mode, ST is shown on display PressV or A less than 0.5 second to manually tune stations When pressed until beep in heard (0.5 sec.), a first receivable frequency is tuned Press A for higher frequency Press V for lower frequency Press SCAN button and searching of station starts from lowest frequency of selected band When receivable frequency is tuned, frequency flashes on display for 5 seconds; then searching starts again Press button again while frequency is flashing to memorize station Six buttons are equipped to set frequencies of up to six stations each for AM, FM, and FM2 1. Setting frequency Select frequency and press a preset button Hold button until deep is heard (1.5 sec.) and setting is complete 2. Tuning to preset frequency Press desired preset button for less than 1.5 seconds 1. Setting frequency Press and hold AUTO-M button until beep is heard (1.5 sec.) Searching starts from lowest frequency within selected band and six strongest stations are selected and memorized 2. Tuning to preset frequency Press AUTO-M button for less than 1.5 seconds and memorized fre- quencies are tuned one by one with each press When preset frequencies is less than six,R appears on display 35UOTX-046 Gartner Banana

AUDIO Name ;can button 3epeat button rrack search button Press SCAN button and beginning of tunes are played one by one (10 seconds for each) Press button during playback and scanning starts from next tune Press button during scanning and tune being scanned is played Scanning is canceled automatically when all programs in disc have been scanned Illustration Press RPT button during a tune is playing to play it repeatedly Press again to cancel repeat operation and resume normal playback Operation Press button to search for beginning of next or current program 1. PressA(up) button for less than 0.5 second during disc play and be- ginning of next tune is selected and played Tunes are changed one by one with each press of button When pressed during play of last tune, first tune is replayed 2. PressV(down) button for less than 0.5 second during disc play and current tune is replayed from beginning Tunes are changed one by one with each press of button When pressed during play of first tune, last tune is replayed Press button to fast forwardheverse disc 1. Press and hold FF (up) button for more than 0.5 second and disc play position moved ahead at high speed while button pressed When last part of last tune is reached, first tune is selected and disc stops 2. Press and hold REV (down) button for opposite operation of FF button When first part of first tune reached, disc stops reversing and starts playing Clock The clock can be set while the radio or tape/CD player is ON. Illustration Clock button (clock display) HIM button (clock setup) Operation Press button to display present radio frequency or operation mode If power supply to unit is broken (burnt fuse or disconnected battery), clock setup will be canceled When clock button is pushed for 2 seconds, clock display flashes. At this point, press H button to advance hours and M button to advance minutes Press clock button again to return to normal display If clock button is pressed again while clock display is flashing and time has not been adjusted (that is, H and M buttons have not been pressed), min- utes will be set at : 00. If time before adjustment showed 30-59 minutes, time will be set at next hour For example, nn Gartner Banana

AUDIO Type 2 AWFM radio Volume control knob F Balance control knob I AM, FM buttons (power switch) - Upldown button Scan tuning button t-- Channel preset tuning button Auto memory button turning Illustration Operation Turn knob clockwise to increase volume Turn knob counterclockwise to decrease volume Turn knob clockwise to shift sound to left Turn knob counterclockwise to shift sound to right 1. With knob original position (bass control) Turn knob clockwise for more bass Turn knob counterclockwise for less bass 2. With knob pulled out (treble control) Turn knob clockwise for more treble Turn knob counterclockwise for less treble 3. To turn audio display off, press knob To turn audio display on, press knob again Press AM or FM button to turn radio power on or off (not necessary to re- move cassette tape or CD) 1. Press AM button to turn AM radio on or off AM radio mode -r AM radio off Other modes + AM radio on 2. Press FM button to move from FM1 1 to FM2 to off Press (A ) or (V ) less than 0.5 second to manually tune stations Press (A ) for higher frequency Press (V ) for lower frequency When pressed more than 0.5 second, frequency search continues until button is released Press button to begin station search from lowest frequency of selected band When receivable frequency is tuned, frequency is displayed for 8 seconds; then searching starts again Press button again while frequency is displayed to memorize station Six buttons are equipped to set frequencies of up six stations each for AM, FMl , and FM2 1. Setting frequency Select frequency and press preset button for more than 1.5 seconds 2. Tuning to preset frequency Press desired preset button for less then 1.5 seconds I. Setting frequency Press button for more than 1.5 seconds Searching starts from lowest frequency within selected band, six stron- gest stations are selected and memorized When preset frequencies are less than six, number of receivable fre- quen ies is shown on display. When there are no receivable frequen- ciesh is displayed 2. Turning to preset frequency Press button repeatedly for less than 1.5 seconds to tune memorized frequencies one by one Gartner Banana

AUDIO Clock The clock can be adjusted during radio, tape, or CD play. I Name I Illustration Clock button (clock display) ALC (Auto level controller) Name 1 Illustration ALCJbodysonic volume control knob I Mute button Roof mode button I Stereo-wide button Operation Press button to display present radio frequency or operation mode If power supply to unit is broken (burnt fuse or disconnected battery), clock setup will be canceled When clock button is pushed for 2 seconds, clock display flashes. At this point, press H button to advance hours and M button to advance minutes Press clock button again to return to normal display If clock button is pressed again while clock display is flashing and time has not been adjusted (that is, H and M buttons have not been pressed), min- utes will be set at :00. If time before adjustment showed 30-59 minutes, time will be set at next hour For example, Operation Press knob to turn ALC on or off 1. At ON, ALC adjusts sound corresponding to vehicle speed; ALC indica- tor light turns on 2. To adjust seat vibration, turn knob to right or left Right -t Seat vibration increases Left + Seat vibration decreases Turn knob right or left to transfer sound Right -+ Door speakers Left -t Headrest speakers Press button to lower overall volume by 10dB Press button to switch between roof-open mode and roof-closed mode; sound quality is adjusted depending on whether roof is opened or closed Press button to turn stereo-wide function on or off At ON, stereo-wide mode improves sound quality Gartner Banana

T AUDIO ANTITHEFT SYSTEM Alarm Conditions If the antitheft system protection has been activated, any one of the following conditions will trigger the sys- tem: .--' Disconnected battery cable Discharged battery Disconnected audio unit connectors. If the system is triggered, the audio unit will then be inoperative when it is reconnected to a power source, and "code" will flash on the display until the preselected code number is input. Follow the procedures in "Canceling Antitheft Operation" (page T-110) to deactivate the unit. Setting the Code Number 1. Turn the audio unit off with the ignition switch at ACC. 2. Push REW and FF simultaneously for approximately 2 seconds until "code" is displayed. 3. Push REW and FF together again within 10 seconds un- til bars appear on the display. 4. Select a personal code number and record it before in- putting it. If the number is input and then forgotten, it can- not be canceled, and if the unit is disconnected again, the audio unit will be inoperati. .-/ 5. Use channel buttons 1-4 to input the selected code number. Press 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. If the display is deleted, repeat the procedure from step 1. 6. With the code number displayed, press and hold REW and FF for approximately 2 seconds until a beep is heard and "code" begins to flash. 7. After approximately 5 seconds, the display will change to time. This indicates the system is set. Gartner Banana

AUDIO T Canceling The Code Number 1. Turn the ignition switch to ACC and then turn off the au- dio unit. 2. Press REW and FF simultaneously for approximately 2 seconds until "code" is displayed. 3. Press REW and FF again until bars appear on the dis- play. 4. Use channel buttons 1-4 to input the current code num- ber. Press 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. 5. With the code number on the display, press and hold REW and FF for approximately 2 seconds until a beep is heard. "Code" will be displayed for approximately 5 se- conds. After it disappears, the code number is canceled. 6. If "ErrW(error) appears on the display, repeat the proce- dure from step 1. To Deactivate Antitheft System Canceling Antitheft Operation 1. Push REW and FF until bars are displayed. 2. Use channel buttons 1-4 to input the current code num- bers. Press 1 for the first digit, 2 for the second, 3 for the third, and 4 for the last digit. Gartner Banana