1994 MAZDA MX-5 maintenance schedule

Schedule interval Maintenance ENGINE Number of months or kilometers {miles), whichever comes first I -. Months 5 10 15 20 25 30 35 40 45 50 55 60 Kilometers 8 16 24 32 40 48 56 64 72 80 88 96 - Service data and inspection point 1~1.000~ Page Spark plugs FUEL SYSTEM -- Plug gap: 1 .GI .l mm {0.04M.043 in) l Recommended spark plugs: D-5 D-6 B-6 F-99 8-1 2 IGNITION SYSTEM R I I Engine oil Engine oil filter Drive belts Air cleaner element Engine timing belt 'l R I R I F-76 F-1 1 3 F-107 F-I30 - Idle speed Fuel filter Fuel lines and hoses PCV valve'2 Emission hoses and tubes R I COOLING SYSTEM I Cooling system Engine coolant R I R I I E4 E-5 E4 I R I R I R I R I*z I l Hoses for cracks or wear l Leaks - Level and strength I R RR I R R R I I R I OilPancapacity: 4.0 L (4.2 US qt, 3.5 Imp qt) 0 Oil filter capacity: 0.15L(0.16USqt,0.13Impqt) 'Cracksordamage 0 Tension - - R I I I I I R I l ldle speed MT: 800-900 rpm (Neutral) AT 750-850 rpm (P range) - l Fittings, connections and components for leaks Operation Fittings and connections I I R I I I I I I I I I R I Gartner Banana

SCHEDULED MAINTENANCE A - CO - c E z2 : $i 2 5 2 m mr 5 z L-O g 2 - 3:: =n - - Gartner Banana

A SCHEDULED MAINTENANCE Gartner Banana

FUEL SYSTEM Installation note Fuel hoses and fuel filler hoses Push the ends of the main fuel hose, fuel return hose, and evaporation hose onto the fuel tank fittings L at least 25mm (1.0 in). Push the fuel filler hose onto the fuel tank pipe and filler pipe at least 35117171 (1.4 in). Power plant frame Install the power plant frame referring to the installation procedure on section J. FUEL FILTER Replacement Low-pressure side (In-tank filter) (Refer to page F-116.) High-pressure side The fuel filter must be replaced at the intervals outlined in the maintenance schedule. Warning Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel. Warning Fuel line spills and leaks are dangerous. Fuel can ~SJOFX-226 ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedures" on page F-108. 1. Raise the rear of the vehicle and support it with safety stands. 2. Remove the fuel filter protector. 3. Disconnect the fuel hoses from the fuel filter. 4. Remove the fuel filter and bracket. 5. Install in the reverse order of removal. 6. Verify that the fuel hoses are pushed fully onto the fuel filter nipples. Tightening torque: 7.9-10.7 N.m (80-110 kgfam, 70-95.4 in-lbf) Gartner Banana