COMFORT ADJUSTMENT
75
3. Remove the seals from the anchors using a screwdriver or
the like.
Bolt
Anchor bracket
Spacer
4. Insert a 10 mm (0.4 in.) spacer for an outer anchor or a 15
mm (0.6 in.) spacer for the center anchor, and tighten down the
anchor bracket for your child restraint system with a bolt.
Torque the bolt to 16.5 − 24.7 N
.m (1.68 − 2.52 kgf.m, 12.2 −
18.2 ft.lb).To comply with Canada Motor Vehicle Safety Standards,
vehicles sold in Canada are provided with a bracket set in the
glovebox, designed for use with the center location. If you want
to install the bracket set on either outer anchor, replace the
spacer (Part No. 90560-08061) with one that is 10 mm (0.4 in.)
thick. This can be purchased from your Lexus dealer.
INSTALLATION ON CENTER REAR SEAT
When installing a rear-facing child restraint system, follow the
same procedure to install a forward-facing child restraint
system.
