INTRODUCTION
164
DO-IT-YOURSELF SERVICE
PRECAUTIONS
If you perform maintenance yourself, be sure to follow the
correct procedure given in this Section.
You should be aware that improper or incomplete servicing
may result in operating problems.
Performing do-it-yourself maintenance during the warranty
period may affect your warranty coverage. Read the separate
Lexus Warranty statement for details and suggestions.
This Section gives instructions only for those items that are
relatively easy for an owner to perform. As explained in
SECTION 5, there are still a number of items that must be
performed by a qualified technician with special tools.
For information on tools and parts for do-it-yourself
maintenance. see “Parts and tools”.
Utmost care should be taken when working on your vehicle to
prevent accidental injury. Here are a few precautions that you
should be especially careful to observe:
CAUTION:
When the engine is running, keep hands, clothing, and
tools away from the moving fan and engine drive belt.
(Removing rings, watches, and ties is advisable.)
Right after driving, the engine, radiator and exhaust
manifold will be hot, so be careful not to touch them. Oil
and fluid may also be hot.Do not smoke, cause sparks or allow open flames near
fuel or the battery. The fumes are flammable.
Be extremely cautious when working on the battery. It
contains poisonous and corrosive sulfuric acid.
Do not get under your vehicle with just the body jack
supporting it. Always use automotive jack stands or
other solid supports.
Use eye protection whenever you work on or under
your vehicle where you may be exposed to flying or
falling material, fluid spray, etc.
NOTICE:
Remember that battery and ignition cables carry high
currents or voltages. Be careful of accidentally
causing a short circuit.
Before closing the engine hood, check to see that you
have not forgotten any tools, rags, etc.
INTRODUCTION
165
PARTS AND TOOLS
Here is a list of parts and tools you will need to perform
do-it-yourself maintenance. Remember all Lexus parts are
designed in metric sizes, so your tools must be metric.
Checking the engine oil level
Parts (if level is low):
API SG or SH, Energy-Conserving II multigrade engine oil
or ILSAC multigrade engine oil. For recommended
viscosity, see page 176.
Tools:
Rag or paper towel
Funnel (only for adding oil)
Checking the engine coolant level
Parts (if level is low):
Ethylene-glycol coolant
Demineralized or distilled water
Tools:
Funnel (only for adding coolant)
Checking and replacing the air cleaner filter
Parts (if replacement is necessary):
1 air cleaner filter, Lexus 17801 -74060 or equivalentTools:
Air compressor (only for cleaning filter)
Checking brake fluid
Parts (if level is low):
FMVSS No. 116 DOT 3 or SAE J1703 brake fluid
Tools:
Funnel (only for adding fluid)
Checking brake pedal freeplay
Tools:
Measure
Checking brake pedal clearance
Tools:
Measure
