AJ16 Engine Service Manual
4.11
SRO 12.21.09
. Remove the air conditioning compressor drive belt.
. Remove the generator drive belt.
. Fit ServiceTool 18G 1437 (1 Fig. 1)tothecrankshaft pulley
. Wedge the tool against the crossmember.
. Remove the pulley retaining bolt.
. Remove Service Tool 18G 1437 from the pulley.
. Fit Service Tool 18G 1436/A to the pulley and tighten the
securing bolts.
. Eghten the center bolt to withdraw the pulley from the
crankshaft and remove the tool.
. Remove the timing plate securing bolts and remove the
timing plate.
. Fitthetiming platetothe new pulleyandtightenthesecur-
ing bolts.
. Fit the pulley to the engine, hand tighten the securing bolt
and fit Service Tool 18G 1437.
. Wedge the tool against the front crossmember, torque
tighten the securing bolt and remove Service Tool 18G
1437.
Crankshaft Damper / Pulley Assembly, Renew
(3 Fig. 1) and tighten the securing bolts (2 Fig. 1).
. Refit the generator drive belt.
. Refit the air conditioning compressor drive belt.
.. J
J12-830
Fia. 1
Issue 1 August 1994 26
0
0
0
