Temperature Selector Bar
The bar under your system display lets you select the temperature of the air
flowing into the passenger area
of your vehicle. Press COLD for cooler air
and press
HOT for warmer air. Release the bar when the system reaches the
temperature you want. The temperature is shown on
the display by the
arrow moving between
C and H.
Air Controls (BLEND)
The two buttons to the right of the system display control the air flow. You
can blend the air flow to suit your needs. The amount
of blending is shown
on the display by an arrow moving between the figure’s feet (floor air flow)
and head (vent air flow).
Left Button
Vent (Top): Press the top of this button and the air flow will come through
the instrument panel vents.
Heater (Bottom): Press the bottom of this button and the air flow will come
through the floor outlet.
The air flow can be blended between the two positions. To blend between
positions press the side of
the button showing the area where you would like
more air flow. The system will automatically begin to blend toward the
position chosen. To stop the system between positions, just press the
SAME
side of the button again.
Right Button
Defrost (Top): This setting operates the defroster. Air comes out near the
bottom
of the windshield and at your front side windows. Use this setting,
along
with a heat setting, when you get fog or ice on the windshield.
Heater (Bottom): Press the bottom of this button and air comes out near the
floor. This setting, along with
a heat setting, is best for passenger comfort in
cold weather.
The air flow can be blended between
the two positions. To blend between
positions, press the side
of the button showing the area where you would
like more air flow. The system
will automatically begin to blend toward the
position chosen. To stop the system between positions, just press the
SAME
side of the button again.
3-7
ProCarManuals.com
