1994 CHEVROLET TRACKER tow bar

Seats and Restraint Systems
4. Unlock the bottom part of the seat.
On the one-piece rear seat, pull ou
On the split rear sear, lift the
the release
ring.
release lever on either seat.
5. Lift the bottom of the seat up and pus1
it toward the front of the vehicle.
i. Find the support bar on the bottom of
the seat. This bar keeps the rear seat
from unfolding.
’. Pull the inner end of the support off of
the seat bracket and swing it down.
’. Push the support bar into the floor
bracket.
Be sure the support bar is
secured.
‘0 unfold the seat:
ieep your hands, safety
belts and other
bjects away from where the seat
will
:st.
Pull the support bar out of the floor
bracket and swing
it up and toward the
bottom of the seat.
Push the support bar into the bracket
on the bottom
of the seat.
Slowly pull the seat down to
the floor.
The seat should latch into place. Pull
up
on the bottom of the seat to be sure
it is locked in position.
Pull the seatback
up and push it back.
Push and pull the
top of the seatback
to
be sure it is locked in place.
. . .I4
ProCarManuals.com

Problems on the Road
I
i’ront Towing Hook-ZJps
ittach “J” hooks to the rear of lower
:onlrol arms inboard
of springs. Position
4x4 wood beam across sling
:hains
and against lower control arm fron
machment brackets. Position the lower
in front and against 4x4
wood beam.
I NOTICE:
I
Dollies are required under the rear
wheels or damage will occur.
I/ /
Attach a separate safety chain around
outboard end
of each lower control arm.
. . .I38
ProCarManuals.com

Rear Towing Hook-Ups
Attach “J” hooks around axle tube.
I
NOTICE:
I
Take care not to darnage the brake
pipes on the axle tubes.
Position the sling crossbar under and
forward of the rear bumper. Attach
a separate safety chain around the
outboard end of each side of the rear axle.
139 ... ProCarManuals.com