Page 13 of 340

Downloaded from www.Manualslib.com manuals search engine Seats & Restraint Systems
Section
Here you'll find information about the seats in your vehicle and how to use
your safety belts properly
. You can also learn about some things you should
not do with safety belts .
Seats and Seat Controls ...................................... 1-2
Head Restraints
.......................................... 1-6
Safety Belts: They're for Everyone
............................. 1-7
Why Safety Belts Work ................................... 1-8
Questions Many People Ask About Safety Belts
............... 1-11
How to Wear Safety Belts Properly
............................ 1-12
Adults
................................................... 1-12
Driver Position
......................................... 1-13
Lap-Shoulder Belt
.................................... 1-13
Safety Belt
Use During Pregnancy .......................... 1-19
Right Front Passenger Position
............................. 1-19
Center Passenger Position
................................. 1-20
LapBelt
............................................ 1-20
Rear Seat Passenger Positions
............................. 1-21
Children ................................................. 1-23
Smaller Children and Babies
.............................. 1-23
Child Restraints ........................................ 1-25
LargerChildren
......................................... 1-30
Safety Belt Extender ....................................... 1-33
Checking
Your Restraint Systems ............................. 1-33
Replacing Safety Belts After a Crash
.......................... 1-33
1-1
Page 24 of 340

Downloaded from www.Manualslib.com manuals search engine 0: If I’m a good drive4 and I never drive farfium home, why should I
A: You may be an excellent driver, but if you’re in an accident - even
wear safety belts?
one that isn’t your fault - you and your passengers can be hurt. Being
a good driver doesn’t protect you from things beyond your control,
such as bad drivers.
Most accidents occur within
25 miles (40 km) of home. And the
greatest number of serious injuries and deaths occur at speeds of less
than
40 mph (65 km/h).
Safety belts are for everyone.
Safety Belt Reminder Light
When the key is turned to “Run” or “Start,” a light will come on for about
eight seconds to remind people to fasten their safety belts. U\
nless the
driver’s safety belt is already buckled, a tone will also sound.
How To Wear Safety Belts Properly
Adults
This section is only for people of adult size.
Be aware that there are special things to know about safety b\
elts and children. And there are different rules for smaller children and babies. If a
child will be riding
in your vehicle, see the section after this one, called
“Children.” Follow those rules for everyone’s protection.\
rlrsz, you’ll want to know which restraint systems your vehicle has\
.
We’ll start with the driver position.
1-12
I
Page 34 of 340
Downloaded from www.Manualslib.com manuals search engine Rear passengers who aren’t safety belted can be thrown out of the vehicle in
a crash. And they can strike others in the vehicle who are wearing safety
belts.
Each jump seat has a
lap belt with no
retractor.
To make the
belt longer, tilt the
latch plate a little and
pull the belt.
To make it shorter,
pull the belt as shown
until it is snug.
Buckle, position and release it the same way as the lap part of the driver’s
safety belt (see “Driver Position” in the Index). Make \
sure the release button
on the buckle
is positioned so you would be able to unbuckle the safety belt
quickly if you ever had to.
Don’t use child restraints on these seats. They won’t wor\
k properly.
1-22
Page 37 of 340

Downloaded from www.Manualslib.com manuals search engine Child Restraints
Be sure to follow the instructions for the restraint. You may find these
instructions on the restraint itself or
in a booklet, or both. These restraints
use the belt system
in your vehicle, but the child also has to be secured
within the restraint to help reduce the chance of personal injury. The
instructions that come with the infant or child restraint will \
show you how
to do that.
The child restraint must be secured properly in the center (except
60/40
bench seat) or right front passenger seat. If you have a 60/40 split bench
seat, you must use the right front passenger seat.
Keep in mind that an unsecured child restraint can move around\
in a
collision or sudden stop and injure people in the vehicle. Be sure to properly
secure any child restraint in your vehicle
- even when nQ. child is in it.
Top Strap
If your child restraint
has
a top strap, it
should be anchored.
If you need to have an anchor installed, you can ask your vehicl\
e dealer to
put it in for you.
If you want to install an anchor yourself, your dealer can
tell you how to do it.
I 1-25
Page 38 of 340
Downloaded from www.Manualslib.com manuals search engine Securing a Child Restraint in the Center Front Seat
Position (Bench Seat
- Except 60/40 Bench Seat)
Don’t use child restraints in the center position of a 60140 bench seat.
When you secure
a child restraint in a center seating position, you’ll be
using the lap belt.
See the earlier section about the top strap
if the child restraint has one.
1. Make the belt as
long as possible
by tilting the
latch plate and
pulling
it along
the belt.
2. Put the restraint on the seat. Follow the instructions for the\
child
restraint.
3. Secure the child in the child restraint
as the instructions say.
4. Run the vehicle’s safety belt through or around the restraint. The child
restraint instructions will show you how.
Page 39 of 340
Downloaded from www.Manualslib.com manuals search engine 5. Buckle the belt.
Make sure the
release button is
positioned
so you
would be able
to
unbuckle the safety belt
quickly
if you
ever had to.
6. To tighten the belt, pull its free end while you push down on the child
restraint.
7. Push and pull the child restraint in different directions to b\
e sure it is
secure.
If the child restraint isn’t secure, turn the latch plate over and
buckle it again. Then
see if it is secure. If it isn’t, secure the restraint in
a different place in the vehicle and contact the child restraint \
maker for
their advice about how to attach the child restraint properly. \
To remove the child restraint, just unbuckle the vehicle’s safety belt. It will
be ready to work for an adult or larger child passenger.
Jump Seats (Extended Cab)
Don’t use child restraints in these positions. The restraints\
won’t work
properly.
1-27
Page 40 of 340
Downloaded from www.Manualslib.com manuals search engine 60/40 Split Bench Seats
8
Don’t use a child restraint in this position. The restraint won’t work
properly.
Securing a Child Restraint in the Right Front Seat
Position
You’ll be using the lap-shoulder belt. See the earlier secti\
on about the top
strap if the child restraint has one.
1.
2.
3. Put
the restraint on the seat. Follow the instructions for the child
restraint.
Secure the child in the child restraint as the instructions say.
Pick up the latch plate, and run the lap and shoulder portions of the
vehicle’s safety belt through or around the restraint. The c\
hild restraint
instructions will show you how.
1-28
1 f
Page 41 of 340
Downloaded from www.Manualslib.com manuals search engine If the shoulder belt goes in front of the child’s face or neck, put it
behind the child restraint.
4. Buckle the belt.
Make sure the
release button
is
positioned so you
would be able
to
unbuckle the
safety belt
quickly
if you
ever had to.
5. Pull the rest of
the shoulder belt
all the way out of
the retractor to
set the lock.
6. To tighten the
belt,
feed the
shoulder belt
back into the
retractor while
you push down
on the child
restraint.
1-29