1994 CHEVROLET ASTRO PASSENGER audio

Downloaded from www.Manualslib.com manuals search engine Table of Contents
Introduction - How to Use this Manual
This section tells you how to use your manual and includes safety
and vehicle damage warnings and symbols.
Section 1 - Seats and Safety Restraints
This section tells you how to use your seats and safety restraints
properly.
Section 2 - Features & Controls
This section explains how to start and operate your vehicle.
Section 3 - Comfort Controls & Audio Systems
This section tells you how to adjust the ventilation and comfort
controls and how
to operate your audio system.
Section 4 - Your Driving and the Road
Here you’ll find helpful information and tips about the road and
how to drive under different conditions.
Section 5 - Problems on the Road
This section tells you what to do if you have a problem while
driving, such as a flat tire or engine overheating.
Section 6 - Service & Appearance Care
Here the manual tells you how to keep your vehicle running
properly and looking good.
Section 7- Scheduled Maintenance Services
This section tells you when to perform vehicle maintenance and
what fluids and lubricants to use.
Section 8 - Customer Assistance Information
This section tells you how to contact your GM division for
assistance and how to get service publications. It also gives you
information on “Reporting Safety Defects’’ on page 84
Index
Here’s an alphabetical listing of almost every subject in this
manual. You can use it to quickly find something you want to read.
iv

Downloaded from www.Manualslib.com manuals search engine Instrument Panel
14 13
27
/
1. Light Switches
2. Dimmer Switch
3. Instrument Cluster
4. Gearshift Lever
5. Air ConditionedHeater
6. Fog Light Switch
7. Remote Outside Mirror Switch
8. Rear Heater Switch
9. Rear A/C Switch
10. Interior Light Override Switch
11. Audio System
12. Convenience Tray
13. Glove
Box
14. Ashtray
15. Cigarette Lighter
16.
Hood Release Handle
17. Hazard Warning Flasher
18. Ignition Switch
19. Horn
20. Brake Release Handle
2
1. Multifunction Lever
22. Cruise Control
23. Tilt Wheel Lever
24. Rear Wipermasher Switch
25. Hatch Release Switch
26. Rear Window Defogger Switch
27. Vent

Downloaded from www.Manualslib.com manuals search engine Comfort Controls & Audio Systems
Section
In this section you’ll find out how to operate the comfort control and audio
systems offered with your vehicle
. Be sure to read about the particular
system supplied with your vehicle
.
For explanation of vehicle symbols in this section. refer to “Vehicle
Symbols” in the Introduction
.
Comfort Control
Flow-Through Ventilation System
......................... 3-2
Heating System
........................................ 3-4
Heating/Air Conditioning System
........................... 3-5
RearHeater
............................................. 3-6
Rear Air Conditioning
......................... ..... 3-6
Rear Window Defogger
. . .......... ... 3-7
Engine Coolant Heater
.............................. ..... 3-8
Audiosystems
............................................. 3-8
....... ....... ........... FM Stereo . . ..... 3-8
AMStereo
.............................................. 3-8
How to Operate Your ETR@ AM Radio
....................... 3-9
How to Operate Your ETR@ AM-FM Stereo Audio System
... 3-11
How to Operate Your ETR@ AM-FM Stereo Audio
Cassette System
...................................... 3-13
How to Operate Your ETR@ AM-FM Stereo Audio Cassette System
With Equalizer
....................................... 3-16
Care of Your Cassette Tape Player
.......................... 3-19
How to Operate Your ETR@ AM-FM Stereo Audio 20
Compact Disc (CD) System
............................ 3-20
Care
of Your Compact Discs .............................. 3-25
Fixed Mast Antenna
..................................... 3-25
AM
............................................. 3-8
3-1

Downloaded from www.Manualslib.com manuals search engine Engine Coolant Heater
If you use the optional engine coolant heater before starting your engine,
your heating system will produce warmer air faster to heat the passenger
compartment in cold weather. See “Engine Coolant Heater” in the Index.
Audio Systems
Your Delco@ audio system has been designed to operate easily and give
years
of listening pleasure. But you will get the most enjoyment out of it, if
you acquaint yourself
with it first. Find out what your Delco@ system can
do and how to operate all its controls, to be sure you’re getting the most out
of
the advanced engineering that went into it.
Be aware that hearing damage from loud noise is almost undetectable until
it is too late. Your hearing can adapt to higher volumes of sound. Sound that
seems normal can be loud and harmful to your hearing. Take precautions by
adjusting the volume control on your radio to a safe sound level before your
hearing adapts to it.
To help avoid hearing loss or damage:
0 Adjust the volume control to the lowest setting.
Increase volume slowly until you hear comfortably and clearly.
FM Stereo
FM stereo will give you the best sound. But FM signals will reach only
about
10 to 40 miles (16 to 65 km). Tall buildings or hills can interfere with
FM signals, causing the sound to come and go.
The range for most AM stations is greater than for FM, especially at night.
The longer range, however, can cause stations to interfere
with each other.
AM can pick up noise from things like storms and power lines. Try reducing
the treble to reduce this noise
if you ever get it.
AM Stereo
This means the Delco@ system can receive C-QUAM@ stereo broadcasts.
Many AM stations around the country use C-QUAM@ to produce stereo,
though some do not. (C-QUAM@ is
a registered trademark of Motorola,
Inc.) If your Delco@ system can get C-QUAM@, your
“STEREO” light will
come on
when you’re receiving it.

Downloaded from www.Manualslib.com manuals search engine How to Operate Your ETW
AM-FM Stel o Audio System
This part tells you how your ETR@ AM-FM stereo audio system works:
The Upper Knob
The upper knob does these three things:
It controls the volume. The VOL knob increases volume when rotated
to the right.
It lets you see what station you have. (When the radio is on, push the
knob
to display the station.)
It tells you the time. (When the ignition is off, push the RECALL knob
to display the time.)
The control behind the upper knob moves the sound between your left and
right speakers.
The Lower Knob
Turn the lower knob to choose radio stations. Push it to get AM or FM.
The control behind the lower knob moves the sound between your front and
rear speakers.
Tone Levers
These two levers control the tone of your radio.
BASS -Slide this lever up to increase the bass response.
TREBLE -Slide this lever up to increase the treble response.
Adjust this lever
to give a pleasing sound. If a station is weak and noisy,
move
TREBLE down to reduce the noise.
PWR (Power)
The PWR button turns your system on and off.
3-11

Downloaded from www.Manualslib.com manuals search engine How to Operate Your ETP
AM-FM Stereo Audio Cassette System
This part tells you how your ETR@ AM-FM stereo audio cassette sound
system works.
The Upper Knob
The upper knob does these four things:
0 It controls the volume. The VOL knob increases volume with to the
right.
It lets you know what station you're listening to. (When the radio is on,
push the knob to display the station.)
It tells you the time. (When the ignition is off, push the knob to display
the time.)
It allows you to hear the other side of the tape. (Press knob while the
cassette is playing.)
The control behind the upper knob moves the sound between
your left and
right speakers.
The Lower Knob
Turn the lower knob to choose radio stations. Push it to get AM or FM. The
control behind the lower knob moves the sound between your front and rear
speakers.
Tone Levers
These two levers control the tone of your radio.
BASS -Slide this lever up to increase the bass response.
3-13

Downloaded from www.Manualslib.com manuals search engine How to Operate Your ETW AM-FM Stereo Audio
Cassette System with Equalizer
This part tells you how your ETR@ AM-FM stereo audio cassette system
with equalizer works.
The Upper Knob
The upper knob does these four things:
0 It controls the volume. The VOL knob increases volume with to the
right.
push
the knob to display the station.)
the time.)
0 It lets you know what station you’re listening to. (When the radio is on,
0 It tells you the time. (When the ignition is off, push the knob to display
0 It allows you to hear the other side of the tape. (Press the knob while
the cassette is playing.)
The control behind the upper knob moves the sound between your left and
right speakers.
The Lower Knob
Turn the lower knob to choose radio stations. Push it to get AM or FM. The
control behind the lower knob moves the sound between your front and rear
speakers.
Tone Levers (Equalizer)
The 5 levers near the upper knob control the tone of your radio.
Use the levers
to set the bass, midrange, and treble until you get the sound
you prefer. The
60 and 250 levers adjust the bass; 1K is midrange; 3.5K and
10K adjust the treble.

Downloaded from www.Manualslib.com manuals search engine PWR (Power)
The PWR button turns your system on and off,
AM-ST Button
Push this button if you want AM stereo. (“STEREO” will be displayed
when you are receiving an
AM stereo station.)
Cr02 Button
The Cr02 button lets you set the system for the type of cassette being used.
If you are using chrome or metal tapes, push the
Cr02 button in. If you are
using standard iron tapes, make sure the button is out.
Your audio system has automatic Dynamic Noise Reduction. It helps
remove background hiss noise from the radio or tape player.
DNR@
DNR@ is a registered trademark of the National Semiconductor
Corporation.
Pushbuttons
The four pushbuttons let you return to favorite stations.
You can set the pushbuttons for up to eight favorite stations
(4 AM and
4 FM). Just:
Tune in the station.
0 Push SET. (SET appears in the VF display for a few seconds.)
0 Within 5 seconds, push one of the four pushbuttons. Whenever you
push that button, the preset station will return.
Repeat these steps for each pushbutton.
NOTE:
You can preset 3 more stations on each band by pushing a pair of buttons
next to each other at the same time. Just:
Tune in the station.
0 Push SET. (SET appears in the VF display for a few seconds.)
0 Within 5 seconds, push two buttons next to each other at the same time.
Whenever you push that pair of buttons, the preset station will return.
Repeat these steps for each pair of buttons.
SCAN Button
When you push this, the radio will go to the next station and stay there a
few seconds. Then it will go to the next station and pause, and keep doing
that. Press
SCAN again to stop scanning.
SEEK Button
This chooses stations also, but it doesn’t keep moving as SCAN does. When
you push SEEK, the radio goes to the next station and stays there.
3-17