1994 CADILLAC DEVILLE light

Downloaded from www.Manualslib.com manuals search engine When the correct fluid level is obtained, push the dipstick back in all -
the way.
ENGINE COOLANT 7
The following explains your cooling system and how to add coolant when (. I
it is low. If you have a problem with engine overheating, see “Engine
Overheating” in the Index.
The proper coolant for your Cadillac will:
0 Give freezing protection down to -34°F (-37OC) .
0 Give boiling protection up to 262 F (128 C) .
0 Prote-ct against rust and corrosion.
Help keep the proper engine temperature.
Let the warning-lights work as they shoula.
What to Use
Use a mixture of one-half clean water (preferably distilled) and one-half
antifreeze that meets
“GM specification 1825-M,” which won’t damage
aluminum parts. You can also use
a recycled coolant conforming to GM
Specification
1825-M with a complete coolant flush and refill. Use GM
Engine Coolant Supplement (sealer) with any complete coolant change.
If you use this mixture, you don’t need to add anything else.
r
c
270

Downloaded from www.Manualslib.com manuals search engine When your brake fluid falls to a low level, the “CHECK BRAKE
FLUID” message will display on the Driver Information Center and your
brake warning light will come on. See “Brake System Warning Light”
in
the Index.
To Check Brake Fluid
Remove the cap.
__ ”
The fluid level must be
//- to the “MAX FILL?
‘1
line at the base of the
MAX FILL neck as shown.
/’ /. . ./ -- .-
When your brake fluid falls to a low level, your brake warning light will
come on. See “Brake System Warning Light” in the Index.
Mat to Add
When you do need brake fluid, use only DOT-3 brake fluid -- such as
- Delco Supreme ll@ (GM Part No.1052535). Use new brake fluid from a
sealed container only, and always clean
the brake fluid reservoir cap
before removing it.
277

Downloaded from www.Manualslib.com manuals search engine r
i i
r I
r
I‘
n I i
r
r’
!
Some driving cond.itions or climates may cause a brakesqueal when the
brakes are..first applied
or lightly applied. This does-not-mean something
is wrong with your brakes.
Brake linings should always be replaced as complete axle sets.
Brake Pedal Travel
See your dealer if the brake pedal does not return to normal,height, or if
these is a rapid increase in pedal travel. This could
be a sign of brake
trouble.
Brake Adjustment
Every time you make a moderate brake stop, your disc brakes adjust for
wear.
If you rarely make a moderate or heavier s.top, then your brakes
might not adjust correctly.
If you drive in that way; then -- very carefully,--
make a
few moderate brake stops about every 1000 miles (1600 km), so
your brakes will adjust prsperly.
Replacing Brake System. Parts
The braking system on a modern vehicle is complex. Its many parts have
to be of top quality and work well together if the vehicle is to have really
good braking. Vehicles
we design and test have top-quality GM brake
parts in them, as your Cadillac does when it
is new. When you replace
parts of your braking system
-- for example, when your brake linings wear
down and you have to have new ones put
in -- be sure you get new
genuine
GM replacement parts. If you don’t, your brakes may no longer
work properly. For example, if someone puts in brake linings that are
wrong for your vehicle, the balance-.between your front and rear brakes
can change, for the worse. The. braking performance you’ve come to
expect can change in many other ways itsomeone puts in the wrong
replacement
brake parts.
279

Downloaded from www.Manualslib.com manuals search engine Start the engine in “P” (Park) and let it idle for 15 minutes. Then:
Put your foot on the brake pedal, shift the transaxle to @ and let it
idle for
3 minutes or more. Do not accelerate the engine. Then:
With the car in @ (Drive), turn the Electronic Climate Control to
“Auto” and let the engine idle for 3 minutes or more.
Turn your engine off.
Now your computer is programmed.
UOGEN BULBS
EXTERIOR UP HOUSINGS
I NOTICE:
Your Cadillac’s lamp housings are designed with small vents so
moisture will be removed when the lights are on, or after driving
for
a short time. If an excessive amount of moisture is present
which does not clear, see your Cadillac dealer for service.
28 1

Downloaded from www.Manualslib.com manuals search engine HEmLIGHT BULB REMOVAL
Here is how to change the halogen headlight bulb.
Rotate the headlight
housing socket
clockwise
1/4 turn
and gently remove
the headlight housing
socket and bulb.
Disconnect the socket from the harness by separating the locking
clip.
.-
NOTICE:
Do not touch glass portion of the new halogen bulb! The oil
from your fingers will shorten the life of your new halogen bulb.

Downloaded from www.Manualslib.com manuals search engine 4. Remove the socket by rotating it counterclockwise slightly, then
replace the bulb and reinstall.
5. When instaliing the
cornering lamp
housing be sure
that the
two guide
pins are aligned
with the holes.

Downloaded from www.Manualslib.com manuals search engine TMLLIGHT BULB REPUCEMENT
1. Loosen the upper
Torex@ screw, but
don’t remove
it.
2, Gently tilt the top portion of the taillight h~using to access the bulb
sockets. (If you can’t access the lower bulb socket: remove the taillight
housing completely.)
.. ~~
3. Press the bulb
socket housing
lever and rotate
the socket
counterclockwise
and remove it.

Downloaded from www.Manualslib.com manuals search engine Using the wrong replacement wheels, wheel bolts, or wheel nuts
on your vehide can be dangerous. It could affect the braking
and handling
of your vehicle, make your tires lose air and make
you lose control. You could have a collision in which
you or
others could be iqjured.
Always use the correct wheel, wheel
bolts, and wheel nuts for replacement.
NOTICE:
The wrong wheel can also cause problems with bearing life,
brake cooling, speedometer/odometer calibration, headlight
aim, bumper height, vehicle ground clearance, and tire
or tire
chain clearance to the body and chassis.
Used Replacement Wheels
I
I A CAUTION:
Putting a used wheel on your vehicle is dangerous. You can’t
know how it% been used or how many miles it’s been driven. It
could fail suddenly and cause an accident.
If you have to replace
a wheel use a GM original equipment wheel.
299