1993 OLDSMOBILE SILHOUETTE service

I
Features & Controls
Engine Coolant Temperature Gage
This gage shows the engine coolant
temperature. If the gage pointer moves
into the red area, your engine is too hot!
It means that your engine coolant has overheated.
If you have been operating
your vehicle under normal driving conditions, you should pull off the road,
stop your vehicle and
turn off the engine
as soon as possible.
HOT COOLANT CAN BURN YOU
BADLY!
In Problems on the Road, this manual
shows what to do. See the
Index under
Engine Overheating.
Brake System Warning Light
Your Oldsmobile’s hydraulic brake
system is divided into two parts. If one
part isn’t working, the other part can
still work and stop you. For good braking,
though, you need both parts working
well.
If the warning light goes on, there
could be a brake problem. Have your
brake system inspected right away.
This light should come on as you start
the vehicle.
If it doesn’t come on then,
have it fixed
so it will be ready to warn
you if there’s a problem.
This light will
also come on when you
set your parking brake, and will stay on
if your parking brake doesn’t release
fully.
If it stays on after your parking
brake is fully released, it means you have a brake problem.
I
If the light comes on while you’re
driving, pull off the road and stop
carefully. You may notice that the pedal
is harder to push. Or, the pedal may go
closer to the floor. It may take longer to
stop.
If the light is still on, have the
vehicle towed for service.
(See the Index
under Towing Your Oldsrnobile.)
Your brake system may not be
h working properly if the brake
-kg light is on. Driving with
cllu ,,&e warning light on can lead
to
an accident. If the light is still
on after you’ve pulled off the road
and stopped carefully, have the
vehicle towed for service.
ProCarManuals.com

Anti-Lock Brake System Warning light
With anti-lock, this light will go on
when you
start your engine and may stay
on for three seconds or
so. That’s
normal.
If the light doesn’t come on,
have
it fixed so it will be ready to warn
you if there is a problem.
If the light stays on or comes on when
you’re driving, stop
as soon as possible
and
turn the key off. Then start the engine
to reset the system.
If the light still stays
on, or comes on again while you’re
driving, your Oldsmobile needs service. Unless the regular brake system waming
light is
also on, you will still have brakes,
but not anti-lock brakes.
If the regular
brake system warning light
is also on,
see
Brake System Warning Light earlier
in this part.
If the anti-lock brake system warning
light ever flashes, your anti-lock
brake
system is still working but needs
service.
The anti-lock brake system warning
light
may also come on when you are
driving with a compact spare tire.
If this
happens, the light
means you won’t have
anti-lock until you replace
the compact
spare with a full-size tire.
If the warning
light stays on after you replace the
compact spare with
a full-size tire, or if
it comes on again when you’re driving,
your Oldsmobile needs service.
ProCarManuals.com

Features & Controls
SLIDIP
GAT1
SERVICE
ENGINE SOON
120 U2165
Malfunction Indicator Lamp
(Service Engine Soon Light)
A computer monitors operation of your
fuel, ignition and emission controls
systems. This light should come
on
when the ignition is on but the engine is
not running, as a check to show you it is
working.
If it does not come on at all,
have it fixed right away.
If it stays on, or
it comes
on while you are driving, the
computer is indicating that
you have a
problem.
You should take your vehicle
in for service
soon.
If you keep driving your vehicle
with this light
on, after awhile the
emission controls won’t work
as
well, your fuel economy won’t be
as good and your engine may not
run as smoothly. This could lead to
costly repairs not covered by you1
warranty.
Lifigate Ajar Warning light
The GATE AJAR light on your
instrument panel will come on if your
liftgate is not completely closed.
ProCarManuals.com

,l
AM Stereo
Your Delco@ system may be able to
receive C-Quam@ stereo broadcasts.
Many
AM stations around the country
use C-Quam@ to produce stereo, though
some do not. C-Quam@ is a registered
trademark
of Motorola, Inc. If your
Delco@ system can get C-Quam@
signals, your stereo indicator light will
come on when you are receiving it.
Care of Your Cassette
Tape
Player
A tape player that is not cleaned
regularly can cause reduced sound
quality, ruined cassettes, or a damaged
mechanism. Cassette tapes should be
stored
in their cases away from
contaminants, direct sunlight, and
extreme heat.
If they aren't, they may
not operate properly or cause failure of
the tape player.
Your tape player should be cleaned
regularly each month
or after every 15
hours of use. If you notice a reduction in
sound quality, try a known good cassette
to see if
the tape or the tape player is at
fault. If this other cassette has no
improvement in sound quality, clean the
tape player. Clean your tape player with
a wiping-
action, non-abrasive cleaning cassette,
and follow the directions provided with
it.
Cassettes are subject to wear and the
sound quality may degrade over time.
Always make sure that the cassette tape
is in good condition before you have
your tape player serviced.
135
ProCarManuals.com

Your Driving and the Road
140
w Road Signs
The road signs you see everywhere are
coded by color, shape and symbols.
It's
a good idea to know these codes so that
you can quickly grasp the basic meaning
or intent of the sign even before you
have a chance to read it.
STOP DO NOT ENTER
Color of Road Signs
Red means Stop. It may also indicate
1
1
:hat some movement is not allowed.
Examples are
Do Not Enter and Wrong
Way.
X4025 I
WRONG
WAY
Green is used to guide the driver. Green
;igns may indicate upcoming freeway
:xits or show the direction you should
urn to reach
a particular place.
RR ADVANCE NARROW NO PASSING
CROSSING BRIDGE ZONE
Yellow indicates a general warning.
Slow down and be careful when
you see
a yellow sign. It may signal a railroad
crossing ahead, a no passing zone, or
some other potentially dangerous
situation. Likewise, a yellow solid line
painted on the road means
Don't Cross.
HOSPITAL
11
Blue signs with white letters show
motorists' services.
ProCarManuals.com

X3006 I
You can steer around the obstacle while
braking hard.
As you brake, your
computer keeps receiving updates on
wheel speed and controls braking
pressure accordingly.
1
‘t
Anti-lock doesn’t change the
time you need to get your foot
up
to the brake pedal. If you get
too close to the vehicle in front of
you, you won’t have time to apply
your brakes if that vehicle suddenly slows
or stops. Always leave enough
room up ahead to stop, even though
you have anti-lock brakes.
To Use Anti-Lock: Don’t pump the
brakes. Just hold the brake pedal down
and let anti-lock work for you. When
you start your vehicle and begin to drive
away, you may notice that your brake
pedal moves a little
while this is going
on.
A brief mechanical noise is normal.
This is
the ABS system testing itself.
You also may hear a clicking noise as
you accelerate after a hard stop.
Disc Brake Wear Indicators
Your Oldsmobile has front disc brakes
and rear drum brakes. Disc brake pads
have built-in wear indicators that make a
high-pitched warning sound when the
brake pads are worn and
new pads are
needed. The sound may come and
go or
be heard all
the time your vehicle is
moving (except when you are pushing
on the brake pedal firmly).
The brake wear warning
sound means that sooner or
later your brakes won’t work well
That could lead to an accident.
when you hear the brake wear
serviced. arning
sound, have your vehicle
151
ProCarManuals.com

Night Vision
No one can see as well at night as in the
daytime. But as we get older these
differences increase.
A 50-year-old
driver may require at least twice as
much light
to see the same thing at night
as a 20-year-old.
What you do in the daytime can also
affect your night vision. For example,
if
you spend the day in bright sunshine you
are wise to wear sunglasses. Your eyes
will have less trouble adjusting to night.
But if you're driving, don't wear
sunglasses at night. They may cut down
on glare from headlights, but they also
make a lot of things invisible that should
remain visible-such as parked cars,
obstacles, pedestrians, or even trains
blocking railway crossings. You may
want to put on your sunglasses after you
have pulled into a brightly-lighted
service or refreshment area. Eyes shielded from that glare
may adjust
more quickly to darkness back on the
road. But be sure to remove your
sunglasses before you leave the service
area.
You can be temporarily blinded by
approaching lights. It can take a second
or two, or even several seconds, for your
eyes to readjust to the dark. When you
are faced with severe glare (as
from a
driver who doesn't lower the high
beams, or a vehicle with misaimed
headlights), slow down a little. Avoid
staring directly into the approaching
lights. If there is a line of opposing
traffic, make occasional glances over the
line of headlights to make certain that
one of the vehicles isn't starting to move
into your lane. Once you are past the
bright lights, give your eyes the to
readjust before resuming speed.
High Beams
If the vehicle approaching you has its
high beams on, signal by flicking yours
to
high and then back to low beam. This
is the usual signal to lower the headlight
beams. If the other driver still doesn't
lower the beams, resist the temptation to
put your high beams on. This only
makes two half-blinded drivers.
On a freeway, use your high beams only
in remote areas where you won't impair
approaching drivers.
In some places,
like cities, using high beams is illegal.
When you follow another vehicle on a
freeway or highway, use low beams.
True, most vehicles now have day-night
mirrors that enable the driver to reduce
glare. But outside mirrors are not
of this
type and high beams from behind can
bother the driver ahead.
ProCarManuals.com

Driving a Long Distance
Although most long trips today are
Before Leaving on a Long Trip
Make sure you’re ready. Try to be well
I
I
I
168
J
7
1
1
-
made on freeways, there are still many
made on regular highways.
Long-distance driving on freeways and regular highways is the same in some
ways. The trip has to be planned and the
vehicle prepared, you drive at higher-
than-city speeds, and there are longer
turns behind the wheel. You’ll enjoy
your trip more if you and your vehicle
are
in good shape. Here are some tips
for a successful long trip. rested.
If you
must start when you’re not
fresh-such as after a day’s work-don’t
plan to make too many miles that first
part of the journey. Wear comfortable
clothing and shoes you can easily drive
in.
Is your vehicle ready for a long trip? If
you keep it serviced and maintained, it’s
ready to go.
If it needs service, have it
done before starting out.
Of course,
you’ll find experienced and able service
experts in Oldsmobile dealerships all across
North America. They’ll be ready
and willing to help
if you need it. Here
are some things you can check
before a trip:
Windshield Washer Fluid: Is the
reservoir full? Are
all windows clean
inside and outside?
Wiper Blades: Are they in good
shape?
Fuel, Engine Oil, Other Fluids:
Have you checked all levels?
Lights: Are they all working? Are the
lenses clean?
Tires: They are vitally important to a
safe, trouble-free trip.
Is the tread
good enough for long-distance
driving? Are the tires
all inflated to
the recommended pressure?
weather outlook along your route? Should you delay your trip a short
time to avoid a major storm system?
Maps: Do you have up-to-date maps?
Weather Forecasts: What’s the
ProCarManuals.com