1993 Oldsmobile Cutlass Supreme engine

How to Use this Manual
MANY PEOPLE READ THEIR OWNER’S Part 1: Seats & Safety Belts
manual from beginning to end when This part tells you how to use your
they first receive their new vehicle. seats and safety belts properly.
This will help you learn about the
features and controls for your vehicle.
Part 2: Features & Controls
In this manual, you’ll find that This part explains how to start and
pictures and words work together operate your Oldsmobile.
to explain thhgs quickly.
There are nine
parts with color-
tabbed pages
in this manual.
Each part begins with
a brief list of
contents,
so you can usually tell at a
glance if that part contains the
information you want.
Part 4: Your Driving and the Road
Here you’ll find helpful information
and tips about the road and how to
Part 3: Comfort Controls & Audio Systems drive under different conditio%
This part tells you how to adjust the
ventflation and comfort controls
and
how to operate your audio system.
Part 5: Problems on the Road
This part tells you what to do if you
have
a problem while driving, such as
a flat tire or engine overheating.
You can bend the manual slightly to
reveal the color tabs that help you
find a part.
6

1
How to Use this Manual
I
Wehicle Symbols (CONTJ
These symbols are on some of your
controls: These symbols are used on warning
and indicator lights:
Windshield Wipers
Engine Coolant
Temperature
Windshield Washer
Windshield Defroster
Rear Window Defogger Ventilating Fan
Power Window
Here are some other symbols you
may see:
Fuse
Battery Charging
System Trunk Release
Lighter
Fuel
Engine
Oil Pressure
Brake
Anti-Lock Brakes Horn
Speaker
Hood Release
b

Run: An “on” position to which the
switch returns after you start your
engine and release the switch. The
switch stays in the
Run position when
the engine is running. But even when
the engine is not running, you can use
Run to operate your electrical power
accessories, and to display some instru-
ment panel warning lights.
Start: Starts the engine. When the
engine starts, release the ley. The
ignition switch will return to
Run for
normal driving.
Note that even
if the engine is not
running, the positions
Accessory and
Run are “on” positions that allow you
to operate your electrical accessories,
such as the radio.
Starting Your Engine
1. Move your shift lever to P (Park) or
N (Neutral). Your engine won’t start
in any other position-that’s a safety
feature.
To restart when you’re
already moving, use
N (Neutral)
only.
2. Don’t push the accelerator pedal
before starting your engine. In some
other vehicles you might need to do
this, but because of your vehicle’s
computer systems, you don’t.
55

Driving Through Deep Standing Wafer €ngine Block Heater (OPTION)
In
very cold weather, 0°F (-18°C) or
colder, the engine block heater can
help. You’ll get easier starting and
better fuel economy during engine
warm-up.
To Use the Block Heater:
1. Turn off the engine.
2. Open the hood and unwrap the
3. Plug it into a normal, grounded
electrical
cord.
110-volt outlet.
CAUTION
I 57

Features & Controls
Engine Block Heater (CONTJ
How long should you keep the block
heater plugged in? The answer depends
on the weather, the kind
of oil you
have, and some other things. Instead of
trying to list everything here, we ask
that you contact an Oldsmobile dealer
in the area where you’ll be parking your
vehicle. The dealer can give you the best
advice for that particular area.
Shifting the Automatic
Transaxle
Your automatic transaxle may have a
shift lever located on the steering
column or on the console between the
seats. Both are shown above.
Maximum engine speed
is limited on
automatic transaxle vehicles when
you’re in
D (Drive) or N (Neutral), to
protect driveline components from
improper operation. There
are six shift positions, seven if you
have Overdrive. In this manual, these
are referred to by the commonly used
symbols in the right column below:
Park P
Reverse
R
Neutral N Overdrive
IDI
Drive D Second
2
First 1

Park
P (Park): This loclcs your front
wheels. It’s the best position
to use
when you start your engine because
your vehicle can’t move easily.
A
I It is dangerous to get out of your vehicle if the shift lever is not fully in
P (Park) with the parking brake firmly set. Your vehicle can roll.
Don’t leave your vehicle when the engine
is running unless you have to. If you
have left the engine running, the vehicle can move suddenly. You or others
could be injured.
To be sure your vehicle won’t move, when you’re on fairly
level ground, always set your parking brake and move the shift lever to
P (Park).
See the
Index under Shifting Into P (Park). If you are parking on a hill, or if
you’re pulling a trailer, also see the
Index under Parking on Hills or Towing a I
Trailer. I
59

Features & Controls
1
Reverse
R (Reverse): Use this gear to back up. To rock your vehicle back and forth to
get out
of snow, ice or sand without
damaging your transaxle,
see the Index
under If You’re Stuck: In Sand, Mud,
Ice or Snow .
CY
Neutral
N (Neutral): In this position, your
engine doesn’t connect with the wheels.
To restart when you’re already moving,
use N (Neutral) only. Also, use
N (Neutral) when your vehicle is being
towed.
A
Shifting out of P (Park) or
N (Neutral) while your
engine is “racing” (running at high
speed) is dangerous. Unless your
foot is firmly on the brake pedal,
your vehicle could move very
rapidly.
You could lose control and
hit people
or objects. Don’t shift
out of
P (Park) or N (Neutral)
lwhile your engine
is racing.

Features & Controli
64
Shifting lnto P (Park)-
Column Shift
It is dangerous to get out of
your vehicle if the shift lever
is not fully in
P (Park) with the
parking brake firmly set. Your
vehicle can roll. If you have left the
engine running, the vehicle can
move suddenly.
You or others
could be injured.
To be sure your
vehicle won't move, when you're
on fairly level ground, use the steps
that follow.
If you are parking on a
hill, or if you're pulling a trailer,
also see the
Index under Parking
on Hills or Towing a Trailer.
1. Hold the brake pedal down with your
right foot and set the parking brake.
'." ' I
2. Move the shift lever into P (Park)
position like this:
Pull the lever towards you.
Move the lever up as far as it will go.
3. Move the ignition key to Lock.
4. Remove the key and tale it with you.
If you can walk away from your
vehicle with the ignition key in your
hand, your vehicle
is in P (Park).