1993 Oldsmobile Cutlass Supreme light

Sewice & Appearance Care
264
Inside Center High-Mounted
SfOP/@hf (4-DOOR MODELS)
For the type of bulb, see the Index
under Replacement Bulbs.
If you would like to clean the inside
surface of the rear window or need to
replace
a bulb, you can remove the
stoplight housing by following these
steps:
1. Remove the two Phillips-head screws
2. Pull down the cover.
3. Unclip the bulb socket from the
4. Pull the bulb out to replace. Push in a
from
the cover.
housing. new bulb.
5. Press the bulb socket back into the
housing.
6. Remove the lens to clean the window
by pressing in
on the ends of the lens.
7. Replace the cover.
Cleaning the Outside of the
Windshield and Wiper Blades
If the windshield is not clear after using
the windshield washer, or
if the wiper
blade chatters when running, wax or
other material may be
on the blade or
windshield.
Clean the outside of the windshield
with
GM Windshield Cleaner, Bon-Ami
Powder@
(GM Part No. 105001 1). The
windshield is clean
if beads do not form
when you rinse it with water.
Clean the blade by wiping vigorously
with a cloth soaked in
full strength
windshield washer solvent. Then rinse
the blade with water.
Wiper blades should be checked
on a
regular basis and replaced when worn.

Glove Box Fuse Block Fuse
1
2
3
4
5
6
7
8
9
10
Rating
(AMP.)
10
15
10
25
10
15
15
20
15
10
11 - 5
12 15
13 10
14
15
16
17
18
10
20
Circuitry
Radio & Clock
Radio
& Clock; Passive Restraint Lockout, Passive Restraint
Timer; DID, Cluster
Door Lock; Courtesy, Glove Box, Underhood, Trunk,
Header Lights; Lighted Inside Rearview Mirror, Outside
Power Mirrors
Windshield Wiper
& Washer
Temp Door Motor; DRL Module (Canada)
; Instrument
Cluster, HUD Dimmer, HUD Module
Brake Lights; ABS Control Module; Chime Module
ECM
Taillights; HVAC; Chime Module; DRL Module (Canada)
Hazard Warning Flasher
Rear Defogger Timer Relay; Instrument Cluster; Chime
Module; Cruise Control;
DRL Module (Canada); Lamp
Driver Module; ABS Lamp Driver
Instrument Panel, Console, Switch Lights
Cigarette Lighter
Turn Signals/Flasher; Computer Center
Not Used
ABS Control Module
Not Used
Not Used Blower Motor, SOL Box
2 71

Service & Appearance Care
272
30
30
30
20
Component Center
Fuse Rating Circuitry
(AMP.)
1 Defogger Timer Relay
2 Air Conditioner Blower Relay (HI)
3 Air Conditioner Blower Relay (LO)
4 Rear Defogger Circuit Breaker
5 Power Accessories Circuit Breaker
6 Power Windows and Sunroof Circuit Breaker
7 Headlight Circuit Breaker
8 Not Used
9 Chime Module
10 Hazard Flasher

Yemice & Appearance Lure
Driver Side Underhood Electrical
Center
Fuse
I 74
E
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Relay
15
16
17
15
Circuitry
Not Used
Not Used
ABS Controller
Exterior
Lights
HCim
ABS Control Module
Not Used
Not
Used
Not Used
Fog Lights
Not Used
Not Used
Not Used
Not Used

Headlight Wiring
The headlight wiring is protected by a
circuit breaker in the component center.
An electrical overload will cause the
lights to go on and
off, or in some cases
to remain
off. If this happens, have your
headlight system checked right away.
Windshield Wipers
The windshield wiper motor is protected
by a circuit breaker and a fuse.
If the
motor overheats due to heavy snow,
etc., the wiper will stop until the motor
cools. If the overload
is caused by some
electrical problem, have it fixed.
Power Windows and Other Power
Options
Circuit breakers in the fuse-panel
protect the power windows and other
power accessories. When the current
load
is too heavy, the circuit breaker
opens and closes, protecting the circuit
until the problem is fixed.
275

Replacemenf Bulbs
QUTNDE .LIGHTS BULB
3057
2358NA 194
2355 891
891
H4351 (L)
H4352 (U)
9006
9005
881
24
24NA 194
3057
920

INSIDE LIGHTS BULB
Ashtray ........................................................................\
.......................
Center Instrument Cluster Analog Cluster
........................................................................\
........
Electronic Cluster ........................................................................\
...
Door ........................................................................\
........................
Rear ........................................................................\
.........................
Front ........................................................................\
.......................
Inside Rearview Mirror ..................................................................
Rear ........................................................................\
.........................
Glove Box Light ........................................................................\
.........
Heater & A/C Control ....................................................................... \
High Beam Indicator ........................................................................\
..
Indicator Lights ........................................................................\
..........
Turn Signal Indicators ....................................................................... \
Visor Vanity Light ........................................................................\
......
Courtesy Lights
Reading Lights
194 168. 194
74
12864
212-2
561
192
212-2
194
37
74
PC161
PC161
124

Maintenunce Schedule
Section C: Periodic Maintenance Inspections
Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall).
You should let your GM dealer’s service department or other qualified service center do these jobs. Make sure any necessary
repairs
are completed at once.
302
INSPECTION
OR SERVICE
Steering, Suspension
and Front-Wheel-Drive
Axle Boot and Seal
Inspection
Exhaust System
Inspection
Throttle Linkage
Inspection
Brake System
Inspection
WHAT SHOULD BE DONE
Inspect the front and rear suspension and steering system for damaged, loose or missing parts,
signs of wear, or lack of lubrication. Inspect the power steering lines and hoses for proper
hookup, binding, leaks, cracks, chafing, etc. Clean and then inspect the drive axle boot seals for
damage, tears or leakage. Replace seals if necessary.
Inspect the complete exhaust system. Inspect the body near the exhaust system. Look for broken,
damaged, missing or out-of-position parts as well as open seams, holes, loose connections, or
other conditions which could cause a heat build-up in the floor
pan or could let exhaust fumes
into the vehicle. See the
Index under Engine Ekhaust.
Inspect the throttle linkage for interference or binding, and for damaged or missing parts.
Replace parts as needed.
Inspect the complete system. Inspect brake lines and hoses for proper hookup, binding, leaks,
cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect
other brake parts, including calipers, parking brake, etc. Check\
parking brake adjustment. You
may need to have your brakes inspected more often if your driving habits or conditions result
in
frequent braking.
NOTE: A low brake fluid level can indicate worn disc brake pads whi\
ch may need to be
serviced. Also, if the brake system warning light stays on or comes on, something may be wrong
with the brake system. See the
Index under Brake System Warning Light. If your vehicle is
equipped with anti-lock brakes and the anti-lock brake system w\
arning light stays on, comes on
or flashes, something may be wrong with the anti-lock brake system. See the
Index under Anti-
Lock Brake System Warning Light.