1993 Oldsmobile Cutlass Supreme ECU

When Finished with the Compact
Disc Player:
If you press POWER or turn off the
ignition, the disc will stay in the player
and start again when you turn on the
ignition or power switch. The disc will
begin playing
at the point where it had
been stopped.
ST/PL (Stop/Play): Press to stop the
disc player; the radio will play. Press
again to play the disc (the player will
start playing the disc where it was
stopped earlier).
EJCT (Eject): Press to eject the disc;
the radio will play.
CD Player Anfi-Theft Feature
Delco LOC II@ is a security feature that
can be used or ignored. If you ignore it,
your system will play normally. If you
use it, your system cannot be turned
on
if it is stolen. These instructions will tell
you how to enter a secret code into your
system. Then,
if battery power is lost for
any reason, the secret code must be
entered again before the system can be
turned on.
To Set:
1. Write down any six-digit number and
keep it in a safe place. This is your
secret code.
Run.
radio off.
the same time and hold until
--- ” shows on the display.
You now have only
15 seconds
between each of the following steps.
2. Turn the ignition to Accessory or
3. Press the POWER button to turn the
4. Press the PREV and FF buttons at
;<
5. Press SET and 000 appears on the
6. Press and hold SEEK until the first
7. Press and hold SCAN until the
display.
digit of your code appears.
second and third digits of your code
appear.
8. Press AM-FM (000 appears).
9. Press and hold SEEK until the
fourth digit of your code appears.
IO. Press and hold SCAN until the fifth
and sixth digits of your code appear.
11. Press AM/FM (rEP will appear for
five seconds, then
000).
12. Repeat steps 6 through 10. Then
press the
AM/FM button again.
SEC will appear, indicating that
Delco
LOC II@ is set, and your
radio is secure. If
‘‘ ” appears,
the steps were not successful and
you must repeat the entire
procedure.
131

Comfort Controls &Audio Systems
132
CD Player Anti-Theft Feature
(CONT.)
To Disable the Anti-Theft System:
Enter your secret code by following
these steps (you will have only
15
seconds between each step).
1. Turn the ignition to Accessory or
Run and the radio off, then press the
PREV and FF buttons of the station
presets.
SEC will appear, showing the
radio is secure.
2. Press SET and 000 appears on the
display.
3. Press and hold SEEK until the first
digit of your secret code appears.
4. Press and hold SCAN until the
second and third digits of your code
appear.
the display).
5. Press AM-FM (000 will appear on
6. Press and hold SEEK until the fourth
digit of your code appears.
7. Press and hold SCAN until the fifth
and sixth digits of your code appear.
8. Press AM/FM. If the display shows
--- ” the radio is unsecured and
will play again. If the display shows
SEC, the steps were not successful
and the numbers did not match the
secret code.
If you lose or forget your code, see your
dealer.
If you lose battery power, when the
battery is reconnected, the system will
not turn on and
LOC will appear.
Follow steps
1-8 for disabling your
system (the time will appear if you are
successful). If
SEC appears, the
numbers did not match and your unit is
still locked.
((
Steering Wheel Touch Controls
for Audio System (OPTION)
Some audio system functions described
in the previous pages can also be
operated with the Steering Wheel
Touch Controls option. These touch controls
also operate some climate
controls. See the
Index under Steering
Wheel
Touch Controls for Climate
Control.
PROG (Program): Press the top of
this button to hear stations which you
have preset on your radio.
AM/FM: Press the bottom of this
button to change between
AM and FM
bands.

A
Towing Your Oldsmobile
Try to have a GM dealer or a
professional towing service tow your
Oldsmobile. The
usual towing
equipment
is:
(A) Sling-type tow truck
(B) Wheel-lift tow truck
(C) Car carrier
If your vehicle .has been changed or
modified since it was factory-new by
adding aftermarket items like fog lamps,
aero skirting, or special tires and
wheels, these instructions and
illustrations may not be correct.
Before you do anything, turn on the
hazard warning flashers. When
you
call, tell the towing service:
That if you have the 4-door “I” series,
or a 2-door Oldsmobile, your vehicle
cannot be towed
from the fiont with
sling-type equipment.
drive.
vehicle. lever.
damaged.
That your vehicle has front-wheel
The make, model, and year of your
Whether you can still move the shift
If there was an accident, what was
When the towing service arrives, let the
tow operator know that this manual
contains detailed towing instructions
and illustrations. The operator may
want to see them.
To help avoid injury to you
or others:
Never let passengers ride in a
vehicle that is being towed.
Never tow faster than safe or
posted speeds.
Never tow with damaged parts
not fully secured.
Never get under your vehicle after
it has been lifted by the tow
truck.
Always use separate safety chains
on each side when towing a
vehicle.
Never use “J” hooks. Use T-
I hnnks instead.
193

Problems on the Road
194
Towing Your Oldsmobile (CONTJ
When your vehicle is being towed, have
the ignition key
off. The steering wheel
should be clamped in
a straight-ahead
position, with
a clamping device
designed for towing service. Do not use
the vehicle’s steering column lock for
this. The transaxle should be in
N (Neutral), and the parking brake
released.
Don’t have your vehicle towed on the
front wheels, unless you must. If the
vehicle must be towed on the front
wheels, don’t go more than
35 mph
(56 km/h) or farther than 50 miles
(80 lun) or your transaxle will be
damaged.
If these limits must be
exceeded, then the front wheels have to
be supported on a dolly. A vehicle can fall from a
car
secured. This can cause a collision,
serious personal injury and vehicle
damage. The vehicle should be
tightly secured with chains or steel
cables before it is transported.
Don’t use substitutes (ropes,
leather straps, canvas webbing,
etc.) that can be cut by sharp edges
underneath the towed vehicle.
/A carrier if it isn’t properly
Towing from the Front-
Vehicle Hook-up
Before hooking up to a tow truck, be
sure
to read all the information on
Towing
Your Oldsmobile earlier in this
section.
All Models
1. Attach T-hook chains into the side
slots in the cradle in front of the
wheels, on both sides.

Problems on the Road
206
Changing a Flat Tire ~CONT.)
3. Twn the wheel wrench retainer nut
located under the tire cover
counterclockwise to remove the
wheel
wrench.
4. Remove the wing nut securing the
compact spare tire
and spacer by
turning
it counterclockwise. Then lift
off the spacer and remove the spare
tire.
5. Remove the bolt securing the jack by
turning
it counterclockwise, Then
remove the jack.

4. Now adjust the vertical aim. Check
the vertical aim for each headlight
and adjust it as necessary.
5. Turn the vertical aiming screw until
the bubble
in the level is centered at
0 (zero).
To Replace a Headlight
(2-DOOR MODELS)
Before replacing a headlight that does
not light, check to make sure that the
wiring connector is securely fastened to
it.
See the
Index under Replacement
Bulbs to check the size and type of
headlight
you need to use before you
begin
to replace the headlight. You
must replace a headlight with one that
is exactly the same.
1. Pry up the plastic pins and remove
the headlight cover.
243

Sewice & Appearance Care
Windshield Wper Blade
Replacement
Replacement blades come in different
types and are removed
in different
ways. Here’s how to remove the type
with a release clip:
1. Pull the windshield wiper arm away
2. Lift the release clip with a
from the windshield.
screwdriver and
pull the blade
assembly
off the wiper arm.
the wiper m.
3. Push the new wiper blade securely on
Loading Your Vehicle
Two labels on your vehicle show how
much weight it may properly carry. The
Tire-Loading Information label found on the inside
of the trunlc lid tells you
the proper size, speed rating and
recommended inflation pressures for
the tires on your vehicle. It
also gives
you important information about the
number
of people that can be in your
vehicle and the total weight that you
can carry. This weight is called the
Vehicle Capacity Weight and includes
the weight
of all occupants, cargo, and
all nonfactory-installed options.
The other label is the Certification label,
on the rear edge
of the driver’s door. It
tells you the gross weight capacity
of
your vehicle, ded the GVWR (Gross
Vehicle Weight Rating). The GVWR
includes the weight of the vehicle,
all
occupants, fuel and cargo. Never exceed
the
GVWR for your vehicle, or the
Gross Axle~Weight Rating (GAWR) for
either the front
or rear axle.
And,
if you do have a heavy load, you
should spread it out. Don’t cany
more
than 167 lbs, (75 kg) in your trunk.