1993 CHEVROLET TRACKER buttons

3pening and Closing Your Sunroof
I. Lower your antenna and swing your
sun visors down.
!. Squeeze the front top bow latch
buttons and pull the latch back.
3. Unhook the latch from the front top
bow.
3
4. Swing the front top bow up and back
while folding the canvas top out from
between the top bow and the roof
support. Be sure that you don’t pinch
the canvas top between the front top
bow arms and the roof rails.
89- 9
ProCarManuals.com

Features & Controls
3. Unsnap the upper and lower straps
that connect the rear top bow to the
side window frames.
4. From inside your vehicle, push out
on the lower front corner metal
support of the rear side window
frames.
5. Unfasten the rear side windows from
6. Hook the frames back to the body of
the frames.
your vehicle. Be sure the strap
is above the frame
so you don't pinch the strap between
the frame and the body of the vehicle.
Snap the strap on the frame to
itself.
7. Squeeze the front top bow latch
buttons and pull the latch back.
ProCarManuals.com

Seek
Press SEEK, or SEEK4 and the
radio will tune to the next higher or
lower station and stay there.
Pushbuttons
The six pushbuttons let you return to
your favorite stations.
To set the
pushbuttons for up to
12 stations (6 AM
and 6 FM), just:
1. Tune in the station.
2. Press and hold one of the
pushbuttons for at least two seconds.
The sound will
go away for a second
and will return when the station is
stored.
Repeat these steps for each pushbutton.
Setting the Tone
Treble:
Turn the TREB knob to the
right to hear more treble.
Bass: Turn the BASS control behind the
TREB knob to the right to hear more
bass.
Adjusting the Speakers
Fade:
Turn the FADE knob to move the
sound between the front and rear
speakers.
Balance: Turn the BAL control behind
the
FADE knob to move the sound
between the
left and right speakers.
Recall
Press RCL to switch the display
between time and frequency. Or, press it
if you want to see the time when the
ignition
is off.
r
ProCarManuals.com

Comfort Controls & Audio Systems
9M/FM Stereo with Cassette
Tape Player
To Play the Radio
hrn the ON/VOL knob to turn the
;ystem on or off.
Volume
Turn the ON/VOL knob to adjust the
volume.
AM-FM
Press AM-FM to get AM, FM 1 or
FM2. The lighted display shows your
selection.
Tune
Press TUNE, or TUNE4 to go to a
higher or lower station. Press either
button and hold
to continue tuning and
release when you find
your station. The
display will indicate the frequency
of
each station tuned.
Seek
Press SEEK, or SEEK4 and the radio
will tune
to the next higher or lower
station and stay there.
Pushbuttons
The six pushbuttons let you return to
your favorite stations. To set the
pushbuttons for up to
18 stations (6 AM,
6 FMl, and 6 FM2), just:
1. Tune in the station.
2. Press and hold one of the
pushbuttons for at least
two seconds.
The sound will go away for a second
and will return when the station
is
stored.
Repeat these steps for each pushbutton.
ProCarManuals.com

EJECT
Press A to remove the tape or stop
the tape and switch to radio.
Radio Monitor
Press the RADIO MNTR button to hear
the radio when you are fast forwarding
or reversing a cassette tape.
You can use
the TUNE, SEEK and PRESET SCAN
buttons while in the radio monitor
mode.
Theft-Deterrent Feature
The theft-deterrent feature for the
AM/FM stereo with cassette tape player
can be used or ignored. If ignored,
the
system plays normally. If it is used,
your system won’t be usable
if it’s ever
l stolen.
Setting Your Security Code
The instructions below tell you how to
enter a security code into the system. If
your
vehicle loses battery power for any
reason, you must enter
the security code
again before the system will turn on.
1. Write down any four-digit number
2. Turn the ignition switch to the ACC
3. Turn the audio system off.
4. Press the 1 and 4 buttons together.
and keep it in
a safe place.
or
ON position.
Hold them down until
“-L” shows
on the display.
You are now ready to enter your
security code. Don’t wait more than
15
seconds between steps.
5. Press 4SEEKb and/or 4TUNEb
and “OOOO” will appear on the
display.
6. Press SEEK4 and hold it until the
first digit of your code appears.
Release the button.
7. Press SEEK, and hold it until the
second digit of your code appears.
Release the button.
8. Press TUNE4 and hold it until the
third digit of your code appears.
Release the button.
113. 9
ProCarManuals.com

Comfort Controls & Audio Systems
9. Press TUNE, and hold it until the
fourth digit
of your code appears.
Release
the button.
checked that
the code you entered
is the one you wrote down. Your
code is not stored and “SEC” will
appear
on the display.
How to Shut Off the Theft-Deterrent
Feature
If your radio is secured (“SEC” shows
on the display) and you wish to disable
it, enter your security code as follows
pausing
no more than 15 seconds
between steps:
1 . Press the 1 and 4 buttons together.
10. Press AM-FM after you have
Hold them down until
“----” shows on the
display.
You are now ready to
enter your security code.
2. Press the SEEK4 button and hold it
until the first digit of your code
appears.
3. Press the SEEK, button and hold it
until the second digit of your code
appears.
4. Press the TUNE4 button and hold it
until the third digit
of your code
appears.
5. Press the TUNE, button and hold it
until the fourth digit of your code
appears.
checked that the code you entered
6. Press AM-FM after you have matches the
one you wrote down.
“ ---- ” should now appear in the
display.
If the code is correct, the radio will
operate. If
the code is wrong, ‘bErr”
will appear in the display.
To Unlock the System after a Power
Loss
If power is disrupted to the radio while
in the “SEC” mode, the unit will not
work and
“LOC” will show on the
display whenever the ignition is on. To
unlock the unit:
1. Press 4SEEKb and/or 4TUNEF
and “00o0” will appear on the
display.
ProCarManuals.com