1993 CHEVROLET CAMARO lock

[x] Cancel search: lock

Page 90 of 358

CHEVROLET CAMARO 1993  Owners Manual Features & Controls 
At dusk,  the exterior  lights  will  come on 
automatically  and  the  front  turn  signal 
lights  will  go  out. 
At dawn,  the exterior 
lights  will 
go out  and  the  front

Page 93 of 358

CHEVROLET CAMARO 1993  Owners Manual The  door key unlocks  the  panels.  Turn  the 
key 
to the  left  to  unlock  the  panel. 
. .- 
Then  pull  on  the  release  handle  to  unlatch 
the  panel.  Lift  the  outer edge of the  panel 
a

Page 94 of 358

CHEVROLET CAMARO 1993  Owners Manual Features & Controls 
I 
Push  the  handle  closed  to  secure  the  panel in  the  slot. 
To lock  each  panel  in  the 
storage  area,  use  your  door  key. 
An improperly 111sw1ea l-rop 
me  vehicl

Page 95 of 358

CHEVROLET CAMARO 1993  Owners Manual 3. Open the latch and  close  the  T-top. 
Check  to  see 
if there are any gaps 
showing.  Unlatch  the  T-top  and  adjust 
the  sunshade  as required. 
4. Once the sunshade  is  installed 
properly

Page 96 of 358

CHEVROLET CAMARO 1993  Owners Manual Features & Controls 
Storage and 
Compartments 
Glove Box 
To open  the  glove box, lift up on  the 
lever. 
Use your door key to lock and 
unlock it. The  glove box has a light 
inside. 
Map Pocket

Page 98 of 358

CHEVROLET CAMARO 1993  Owners Manual Features & Contr 
I 
When  carrying  large or heavy  items, it is 
a good idea  to  open  the  panel  and  place 
the  items 
in the  rear  area. 
I 
A An improperly stored close-out 
, panel could be

Page 105 of 358

CHEVROLET CAMARO 1993  Owners Manual I 
This light will also  come on when  you  set 
your  parking  brake,  and  will  stay  on 
if 
your  parking  brake  doesn’t release fully. 
If it stays on after  your  parking  brake  is 
fully r

Page 106 of 358

CHEVROLET CAMARO 1993  Owners Manual Features 8t Controls 
f 
I 
I 
. ’ 102 
If the  light  stays  on or comes on when 
you’re  driving,  stop 
as soon as possible 
and  turn  the  key  off.  Then  start  the  engine 
to reset  the