1993 CADILLAC SEVILLE ad blue

Downloaded from www.Manualslib.com manuals search engine Vehicle Damage Warnings
Also, in this book you will find these blue notices:
NOTICE:
These mean there 3s sometiring that could damage your vehicle.
In the blue notice area, we tell you about something that can damage
your vehicle. Many times, this damage would not be covered
by your
warranty, and
it could be costly. But the notice will tell you what to do to
help avoid the damage.
When you read other manuals, you might see CAUTION and NOTICE
warnings
in different colors or in different words. In this manual, we’ve
used the familiar words and colors that Cadillac has used for years.
You’ll also see warning labels on your vehicle. They use the same colors,
and the
words CAUTION or NOTICE.
2

Downloaded from www.Manualslib.com manuals search engine c
As you signal a turn or a lane change, if the arrows don’t flash but just
stay
on, a signal bulb may be burned out and other drivers won’t see your
turn signal.
If a bulb is burned out, replace it to help avoid an accident. If the green
arrows don’t go on at all when you signal
a turn, check the fuse (see
“Fuses” in the Index) and for burned-out bulbs.
Headlight High-Low Beam
To change the
headlights from low
i beam to high or high to
low, pull the turn signal
lever all the way toward
you. Then release it.
When the high beams
are
on, a blue light on
the instrument panel
also will be on.
Flash-To-Pass Feature
This lets you use your high beam headlights to signal a driver in front of
you that you want to pass. It works even if your headlights are off.
To use it, pull the multifunction lever toward you. When you do:
If vour headlights are off Your high beam headlights will turn on. They’ll
stay on as long as you hold the
lever there. Release the lever to turn them
off.
If vour headlights are on, but on low beam: The system works normally.
Just pull the lever. Your headlights will shift to high beam and stay there.
To return to low beam, just pull the lever toward you.
If your headlights are on, and on high beam: Your headlights will switch
to low beam. To get back to high beam, pull the lever toward you.
10 1

Downloaded from www.Manualslib.com manuals search engine DISPLAY ON/OFF
Pressing this button will turn off the Driver Information Center,
Electronic Climate Control and Fuel Data Center displays. While
displays are off, pressing the “INFORMATION” button
will turn on only
the Driver Information Center. If any other button is pressed or a driving
warning message needs to be displayed, or fuel level falls below
4 gallons,
all the displays
will come back on.
TRIP SET
Press and hold this button to set the Trip Odometer back to zero.
ENG/MET (English/Metric)
Press this button to switch from English (miles) to metric (kilometers).
Driver Information Center Messages
These messages will appear if there is a problem sensed in one of your
vehicle’s systems. Vehicles that are first sold
in Canada or are export
vehicles
will have a number after each message. This number helps to
identify that message, which is only displayed in English.
APPLY BRAKE TO SHIFT
This message will appear if your vehicle is in “P” (Park) for about 5
seconds and the brake is not depressed. If you do not want this message
to appear, you can cancel this message by pressing the
OFF and the Blue
(cooler) button
on the Electronic Climate control panel. Push the same 2
buttons again to have this message displayed again.
If the refrigerant system ever reaches an over-pressure condition, this
message will appear to tell you that the air conditioning compressor has
been turned off. Air conditioned air
will not be delivered to cool your
vehicle. If the pressure returns to a normal operating range, you must
select “AUTO”, “DEFOG”
, or Defrost to start the compressor. If this
message continues to appear, have the system repaired as soon as
possible to avoid compressor damage.
A/C OVERHEATED - A/C COMPRESSOR OFF
BATTERY NO CHARGE
This message will appear if your battery is not being charged. Have your
electrical system checked by your Cadillac dealership at your earliest
convenience.
137

Downloaded from www.Manualslib.com manuals search engine Temperature
To select the
temperature you want,
push the blue button
for a cooler setting and
the red button for a
warmer setting. The
temperature setting
will be displayed on
the digital screen.
You can select temperatures from 65OF (18OC) to
85°F (69OC). And, at
each end, you may choose 60"
F (16OC), for maximum cooling, and 90°F
(33OC), for maximum heating.We recommend when first getting familiar
with your vehicle, select 75OF (24OC). You may find that your own
personal comfort requires a slightly higher or lower setting. Once you set
the temperature, the system
will automatically maintain the set
temperature.
ECON
With this setting it's all automatic, but the air conditioning compressor \
does not operate and it won't remove
humidity from the air. However,
the system
will try to keep the air at the selected temperature. Use this
setting
in cold or cool weather to save fuel.
If it's warm outside and you need to cool the air, use the next choice.
AUTO
With this setting, the air conditioning compressor runs and it's all
automatic. In cold weather when the system senses the need for\
heat, the
air flow
will be directed out the floor ducts. As the interior temperature
approaches the desired setting, the blower speed
will decrease and the air
flow could be directed through the defroster and floor ducts.
To maintain
interior comfort, the air flow may move to the air outlets and floor ducts
(Bi-level). On bright sunny days in cold weather, the air flow could even
come out the A/C outlets to maintain comfort.
148
-.

Downloaded from www.Manualslib.com manuals search engine ~
~ HOSPITAL INFORMATION
BLUE signs with white letters show motorists’ services.
‘
L
CANOEING SWIMMING
BROWN signs point out recreation areas or points of historic or cultural
interest.
Shape of Road Signs
The shape of the sign will tell you something, too.
168