
Trunk
Remote Trunk Release
I
The trunk release switch in
the glove
box must be ON
for the TRUNK button to
work. This feature allows
you
to secure items in the
trunk.
To secure, turn OFF
i .= TRUNK
I
the TRUNK RELEASE,
lock the glove box, then
take the door key with you.
The TRUNK button is on
the instrument panel
to the
left of the steering column.
It will release the trunk
lock when in Retained
Accessory Power mode or
with the ignition switch
ON
and the transaxle in PARK
If you have the Remote Keyless Entry System, it will
also unlock your trunk.
Automatic Pull-Down Feature (Option)
If you have this feature, it pulls the trunk lid closed. This
allows you to gently push the trunk lid down and the
pull-down feature then secures it completely.
/d CAUTION:
Your car may have an automatic pull down
feature that helps close the trunk electronically.
Your fingers can be trapped under the trunk lid
as it goes down. Your fingers could be injured,
and you would need someone
to help you free
them. Keep your fingers away from the trunk lid
as you close
it and as it is going down.
NOTICE:
Do not slam your LI UI ~r< lid QuvVn if you have th
pull-down feature. If you do, you may damage t
ProCarManuals.com

pressed. The trunk will unlock when the opened trunk
symbol is pressed, but only when the ignition is off.
Illuminated Entry System
If your Buick also has this option, the keytag will make
it work. Touch any button on the keytag to light up the
door locks and the inside
of your car. The lights will
stay on for
15 to 30 seconds.
Theft Deterrent System
If your Buick also has this option, the keytag will arm it
whenever the doors are closed and you push the
LOCK
button. It will disarm the system when you push
UNLOCK.
Matching %ansmitter(s) To Your Vehicle
Each key chain transmitter is coded to prevent another
transmitter from unlocking your vehicle. If a transmitter
is lost or stolen, a replacement can be purchased through
your dealer. Remember to bring the remaining
transmitter with you when
you go to your dealer. When
the dealer matches the replacement transmitter to
your
vehicle, the remaining transmitter must also be matched.
Once the new transmitter is coded, the lost transmitter
will not unlock your vehicle.
You can match a transmitter to as many different
vehicles as you own, provided they are equipped with
exactly the same model svstem. (General Motors offers
several different models
of these systems on their
vehicles.) Each vehicle can have only two transmitters
matched to it.
To match a transmitter, use the following instructions.
1. Have both transmitters that will be matched to the
car present, even if only one is new. Remove the car
keys from the ignition and have them with you.
2. Find the 12 pin diagnostic connector above the
accelerator pedal.
r
BLK
ASSEMBLY LINE DIAGNOSTIC
LINK (ALDL) CONNECTOR
1
ProCarManuals.com

Theft
Vehicle theft is big business, especially in some cities.
Although your Buick has a number of theft deterrent
features, we know that nothing we put on
it can make it
impossible to steal. However, there are ways you can
help.
Kev in the ignition: If you walk away from your
vehicle with the keys inside, it’s an easy target for joy
riders or professional thieves
-- so don’t do it.
When you park your Buick and open the driver’s door,
you’ll hear a tone reminding you to remove your key
from
the ignition and take it with you. Always do this.
Your steering wheel will be locked, and
so will your
ignition and transaxle. And remember to lock the doors.
Parking at Night: Park in a lighted spot, close all
windows and lock your vehicle. Remember
to keep your
valuables
out of sight. Put them in a storage area, or take
them with you.
Parking. Lots: If you park
in a lot where someone will
be watching your vehicle, it’s best to lock
it up and take
your keys. But what if you have
to leave your ignition
key? What if you have to leave something valuable
in
your vehicle?
Put your valuables in a storage area, like your trunk
Lock the glove box.
or glove
box.
0 Lock all the doors except the driver’s.
0 Then take the door key with you.
Universal Theft Deterrent (Option)
If your Buick has this option, it has a theft deterrent
alarm system. With this system, the “SECURITY’’ light
will flash as
you open the door (if your ignition is off).
This light reminds you
to arm the theft deterrent system.
Here’s how to do it:
1. Open the door.
2. Lock the door with the power door lock switch or
Remote Keyless Entry System. The “SECURITY”
light should come on
and stay on.
3. Close all doors. The “SECURITY” light should go
off.
If a door or the trunk is opened without the key or
Remote Keyless Entry System, the alarm will
go off. It
will also
go off if a door lock or the trunk lock is
damaged. Your vehicle’s lights will flash and the horn
71
ProCarManuals.com

will sound for several minutes, then will go off to save
battery power.
Remember, the theft deterrent system won’t arm if you
lock
the doors with a key or manual door lock. It arms
only if you use
a power door lock switch or Remote
Keyless Entry System. You should also remember that
you can start your vehicle with the correct ignition key
if the alarm has been set
off. You must still shut off the
alarm by inserting the key’in the door lock.
Here’s how to avoid setting
off the alarm by accident:
0
0
If you don’t want to arm the theft deterrent system,
the vehicle should be locked after the doors are
closed.
Always unlock a door with’a key, or use the Remote
Keyless Entry System. Unlocking a door any other
way will set
off the alarm. If
you set
off the alarm by accident, unlock any door
with your
key.
You can also turn off the alarm by using the Remote
Keyless Entry System,
if you have it. The alarm won’t
stop
if you try to unlock a door any other way.
How to Test The Alarm
The alarm can be tested by first having the driver’s
window down. Arm
the system by locking the doors
with the power door lock switch or the Remote Keyless
Entry System. Get out
of the car and close the door, wait
for the security light to go out, then reach in through the
window, unlock the door with the manual door lock,
then open the door. This should set the alarm off.
If the alarm does not sound when
it should, check to see
if the horn works. The horn fuse may be blown. To
replace the fuse, see “Fuses and Circuit Breakers” in the
Index.
72
ProCarManuals.com

PASS-Key I1 TM
Your vehicle is equipped with the PASS-Key I1 TM
(Personalized Automotive Security System) theft
deterrent system. PASS-Key
I1 TM is a passive theft
deterrent system. This means you don’t have to do
anything different to arm or disarm the system. It works
when you insert or remove the key from the ignition.
PASS-Key
TM uses a resistor pellet in the ignition key
that matches a decoder in your vehicle. When the PASS-Key
I1 system senses that someone
using the wrong key, it shuts down the vehicle’s starter
and
fuel systems. For about three minutes, the starter
won’t work and fuel won’t go to the engine. If someonl
tries to start your vehicle again or uses another key
during this time, the vehicle will not start. This
discourages someone from randomly trying different
is
e
keys with different resistor pellets in an attempt to make
a match.
The ignition
key must be clean and dry before it’s
inserted in the ignition or the engine may not start. If the
engine does not start and the “SECURITY” light comes
on, the key may be dirty or wet. Turn the ignition
off.
Clean and dry the key. Wait about three minutes and try
again. The security light will remain on during this time.
If the starter still won’t work, and the key appears to be
clean and dry, wait about three minutes and try the other
ignition key.
At this time, you may also want to check
the fuse (see “Fuses and Circuit Breakers” in the Index).
If the starter won’t work with the other key, your vehicle
needs service. If your vehicle does start, the first ignition
key may
be faulty. See your Buick dealer or a locksmith
who can service the PASS-Key I1
TM .
If you accidentally use a key that has a damaged or
missing resistor pellet, the starter won’t work and the
ProCarManuals.com

security light will flash. But you don’t have to wait three
minutes before trying one of the other ignition keys.
See your Buick dealer or a locksmith who can service
the Pass-Key I1
TM to have a new key made.
If you’re ever driving and the “SECURITY” light comes
on for one minute and stays on, you will be able to
restart your engine if
you turn it off. Your PASS-Key
I1
TM system, however, is not working properly and must
be serviced by your Buick dealer. Your vehicle
is not
protected by the PASS-Key I1
TM system.
If you
lose or damage a PASS-Key I1 ignition key, see
your Buick dealer or a locksmith who can service
PASS-Key
I1 TM to have a new key made.
New Vehicle “Break-In”
74
ProCarManuals.com

Ignition Key Positions
Your square-headed key
operates your ignition lock.
ACC
1
I
This lock gives you five different positions.
Before
you put the key in, your ignition will be in the
“Lock” position. This position locks your ignition,
steering wheel and transaxle. It’s a
theft deterrent
feature.
The other positions let you perform these functions:
ACC: Accessory lets you use things like the radio and
the windshield wipers when the engine is off. To get into
“Acc”, push in the key and turn it toward
you. Your
ProCarManuals.com

steering wheel will remain locked, just as it was before
you inserted the key.
OFF: This position lets you turn off the engine but still
turn the steering wheel.
It doesn’t lock the steering
wheel like “Lock.” Use “Off’ if
you must have your car
in motion while the engine is off (for example, if your
car is being pushed).
RUN: This is the position for driving.
START This position starts your engine.
NOTICE:
If your key seems stuck in “Lock” and you can’t
turn
it, be sure it is all the way in. If it is, then turn
the steering wheel left and right while you turn
the key hard. But turn the key only with your
hand. Using a tool to force
it could break the key
or the ignition switch. If none of this works, then
your vehicle needs service.
p’
Retained Accessory Power (Option)
After the ignition is turned off, and before any door is
opened, the following systems will work for ten
minutes:
0 Fuel Filler Door Release
Trunk Release
0 Power Windows
Radio
0 Brake Transaxle Shift Interlock
0 Optional Astroroof
Starting Your Engine
Engines start differently. The 8th digit of your Vehicle
Identification Number
(VIN) shows the code letter or
number for your engine. You will find the
VIN at the top
left of your instrument panel. (See “Vehicle
Identification Number” in the Index.) Follow the proper
steps to start the engine.
ProCarManuals.com