1992 VOLKSWAGEN TRANSPORTER parking brake

Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND EQUIPMENT

-andbrake

~: ;:dy the handbrake pull lever up
firmly.

Zr - s the
1
st gear or
with
automatic gear- :ne parking lock should also be en-

r'zz^z.
The handbrake should always be

ace
53 so
firmly
that
it is not possible to
zr .9 nadvertently
with
the handbrake on.

~T"
handbrake is applied
with
the ignition
• :_e brake warning lamp comes on.
~: "e ease handbrake, pull lever up slightly,
: r;s locking knob in and push lever
right
Manual
gearbox

Note

When driving you shot z ' z: est .: ~ E~ :
on the gear lever. The press^-e z~ .:„'-="
is
transmitted to the selectc ~z'-~ - ~T
gearbox and can cause pren-a:_"5 .-, ~z' z~
the forks.
Gear
gate

• All forward gears are baulk synchro­
nised.
The synchronising hubs enable easy
noise-free selection of the forward gears.
• Only engage reverse gear when vehicle
is
stationary. When engine is running, de­

press
clutch
fully
and
wait
a few seconds
before moving gear lever, to prevent grating

noises.

When reverse gear is engaged
with
ignition
on,
the reversing lights come on.

3'
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans

Downloaded from www.Manualslib.com manuals search engine
CONTROLS AND
EQUIPMENT

Emergency
programme
~.~:;ional defects occur in the electronic
. ;:e~ the gearbox can, amongst other ' "is. carry on operating in two emergency
: ::_s~imes:
• Tre gearbox continues to change up and x ••- automatically as before but hard
shift
- 3 are however noticeable. The vehicle •<:- 3 be taken to a Volkswagen dealer.

~e
gearbox no longer changes up and - automatically.
"•= rearbox can then be shifted manually
:- tie selector lever positions "D", "3"
;': 2" only the 3rd gear is available.
- selector lever positions "1" and "R", the =: and reverse gears are available as nor-
-: .vever, the converter must, due to the ab-

;-s~ce
of 2nd gear
work
harder, and under
:e~ain
circumstances this
causes
the con- r~er to overheat. In a
case
such as this the
•eiide should be taken, as soon as
poss-
: e, to a Volkswagen dealer.
Selector
lever
lock

In positions "P" and "N"
with
the ignition
switch on the selector lever is locked. To move the selector lever out of these
posi­

tions the brake pedal must be depressed
and the selector lever
button
pushed-in.

This
prevents a gear being engaged inadver­

tently
and the vehicle unintentionally mov­ ing off.

A
delay circuit prevents the selector lever

from
locking when it is moved quickly past
the "N" position (for instance
from
"R" to
"D").
This enables for example the vehicle
to be "rocked" out of a "bogged down" position. The
shift
lock only locks the
selec­

tor lever if it is
left
in the "N" position for more than about
1
second
without
the brake
pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically switched-off in
posi­

tion
"N". In the dash panel there is a display tra:

shows
the currently selected selects' eve' position.

Selector
lever
positions

P -
Parking
lock

The driving wheels are locked mechanics .
The parking lock may only be engagec
the vehicle is stationary. Before mov -g :_e lever in or out of the "P" position tre" ::•

button
in the selector lever handle r-_s: re­

pressed.
Before moving the
se!e:::"

out of the "P" position, the ca-e ;e:s must also be depressed when 're z~;z~ ;
switched on.
11 Depending upon the rrc~e ~._e : s; = :;~
also
be
fitted
in the Cc~: e":
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans

Downloaded from www.Manualslib.com manuals search engine
CONTROLS
AND EQUIPMENT
Notes on driving Starting

\
e
engine
can only be started when
selec-
pr
ever
is at
"N"
or
"P".
See
also
"Starting

Br:
re" on
page
37.

Selecting
a driving range When the vehicle is stationary and
the engine is running always de­
press
the foot brake when selecting
i gear.
When the vehicle is stationary do
•ot depress the accelerator when
•electing a gear. f the lever is moved accidentally nto "IM" when driving, release ac­
celerator and let the engine speed
trop to idling before selecting a for­
ward
gear again.

•
Attention
•
When the engine is running it
is
necessary to hold the vehicle

with
the foot brake in all gears.
Because
with
an automatic gear­
box the transfer of power is not
fully interrupted even at idling

speed
- and the vehicle tends to
"creep".
When the vehicle is stationary
and a gear is engaged, the

throttle
must not be opened inad­

vertently
on any account (for in­

stance
by hand from the engine
compartment). Otherwise the ve­hicle
will
move immediately -
even if the handbrake has been
fully applied.
Before working on the vehicle

with
the engine running, apply
the handbrake and put the selec­
tor lever in "P".
Moving off

Select
driving
range
(R, D, 3, 2, 1).
Wait

until
the gearbox has
shifted
and the

power
flow
is made to the
driving

wheels
(light
selection
jerk
perceptible).

Then
one can accelerate.

Stopping

To
stop
vehicle
temporarily
such
as at traffic
lights,
it is only
necessary
to
apply
the

brakes.
It is not
necessary
to
move
selector

lever
to
"N".
The
engine
should
however

only
be running at idling
speed.
Parking

On
level
ground all you
need
do is
engage

the
parking
lock.
On a gradient the
hand­
brake
should
be
applied
firmly first
and
then

the
parking
lock
engaged.
This
will
ensure

that the
locking
mechanism
is not too
heav­
ily
loaded
and
makes
the
lock
easier
to
dis­

engage.

Tow starting
On
vehicles
with
automatic
gearbox
the en­

gine
cannot
be started by towing or
pushing

the
vehicle.
See
page
133.

When
the battery is flat, the
engine
can be
started
from the battery of another
vehicle

by
using
jumper
cables.
See
"Emergency

starting",
page
130.
Towing If the
vehicle
has to be towed at any time,

you
must
read
the instructions in the
sec­

tion
"Towing/tow
starting on
page
132.
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans