Page 1303 of 1333
Camber (Degrees)
Front .................... 13/16 ................ 5/16 to 15/16
Rear ....................... 0 .................... -1/2 to 1/2
Caster (Degrees) .......... 13/16 ................ 5/16 to 15/16\
Toe-In (In. (mm))
Front & Rear ............. 0 (0) ........ -1/8 to 1/8 (-3 to 3\
)
Toe-In (Degrees)
Front & Rear ............... 0 .................... -1/4 to 1/4
Toe-Out on Turns (Degrees)
Inner ................... 37 3/4 ........................ .....
Outer .................. 30 11/16 ....................... .....
\
\
\
\
\
\
\
WHEEL ALIGNMENT SPECIFICATIONS TABLE (ECLIPSE) \
\
\
\
\
\
\
Application Preferred Range
1.8L Engine
Camber (Degrees)
Front ..................... 1/4 ................... -1/4 to 3/4
Rear ..................... -3/4 ................ -1 1/4 to -1/4
Caster (Degrees) ......... 2 5/16 ........... 1 13/16 to 2 13/16\
Toe-In (In. (mm))
Front & Rear ............. 0 (0) ........ -1/8 to 1/8 (-3 to 3\
)
Toe-In (Degrees)
Front & Rear ............... 0 .................... -1/4 to 1/4
2.0L Engine (2WD)
Camber (Degrees)
Front .................... 1/16 ................. -7/16 to 9/16
Rear ..................... -3/4 ................ -1 1/4 to -1/4
Caster (Degrees) ......... 2 3/8 ................ 1 7/8 to 2 7/8\
Toe-In (In. (mm))
Front & Rear ............. 0 (0) ........ -1/8 to 1/8 (-3 to 3\
)
Toe-In (Degrees)
Front & Rear ............... 0 .................... -1/4 to 1/4
2.0L Engine (4WD)
Camber (Degrees)
Front .................... 3/16 ................ -5/16 to 11/16
Rear ................... -1 9/16 ........... -2 1/16 to -1 1/16
Caster (Degrees) ......... 2 5/16 ........... 1 13/16 to 2 13/16\
Toe-In (In. (mm))
Front .................... 0 (0) ........ -1/8 to 1/8 (-3 to 3\
)
Rear .................. 9/64 (3.6) .. -1/32 to 1/4 (-.6 to 6.6\
)
Toe-In (Degrees)
Front ...................... 0 .................... -1/4 to 1/4
Rear ..................... 9/32 ................... 1/16 to 1/2
\
\
\
\
\
\
\
WHEEL ALIGNMENT SPECIFICATIONS TABLE (GALANT) \
\
\
\
\
\
\
Application Preferred Range
Two Wheel Drive
Camber (Degrees)
Front ..................... 3/8 ................... -1/8 to 7/8
Rear ..................... -3/4 ................ -1 1/4 to -1/4
Caster (Degrees) ............ 2 ................. 1 1/2 to 2 1/2\
Toe-In (In. (mm))
Front & Rear ............. 0 (0) ........ -1/8 to 1/8 (-3 to 3\
)
Toe-In (Degrees)
Front & Rear ............... 0 .................... -1/4 to 1/4
Four Wheel Drive
Camber (Degrees)
Page 1318 of 1333
Fig. 1: Identifying Tie-Off Symbols
4) If the wires are not drawn all the way to another
component (across several pages), a reference will tell you their
final destination.
5) Again, use the legend on the first page of the wiring
diagram to determine the grid number and letter of the referenced
component. You can then turn directly to it without tracing wires
across several pages.
6) The symbols shown in Fig. 1 are called tie-offs. The first
tie-off shown indicates that the circuit goes to the temperature
sensor, and is also a ground circuit.
7) The second symbol indicates that the circuit goes to a
battery positive parallel circuit. The third symbol leads to a
particular component and the location is also given.
8) The lines shown in Fig. 2 are called options. Which path
or option to take depends on what engine or systems the vehicle has.
Page 1327 of 1333
Fig. 1: Engine Compt, Headlights, (Grid 1-3)
Page 1328 of 1333
Fig. 2: Computer Engine Control (3.0L) (Grid 4-7)
