REAR WHEEL ALIGNMENT
SA1A0±01
1. MEASURE VEHICLE HEIGHTRear vehicle height (SC400):
Tire size Rear
P225/55R16251.7 mm (9.909 in.)
Rear vehicle height (SC300):
Tire size Rear
P215/60R15247.7 mm (9.752 in.)
Measuring point:
Measure from the ground to the center of the lower suspen-
sion arm No.2 mounting bolt.
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to spe\
cification.If the vehicle height is not standard, try to adjust it by pushing
down on or lifting the body.
2. INSTALL CAMBER±CASTER±KINGPIN GAUGE OR ONTO WHEEL ALIGNMENT TESTER
Follow the specific instructions of the equipment manufactur-
er.
3. INSPECT CAMBER
Camber:
Camber
Left±right error
±0
553 ' + 45 '
30 ' or less
4. INSPECT TOE±IN
Toe±in (total):
A+B 0.4 5 + 0.2 5
C±D 4.5 + 2 mm (0.18 + 0.08 in.)
5. ADJUST CAMBER AND TOE±IN
(a) Measure the length of the lower suspension arm No.1 and
No.2, as shown in the illustration.
SA±10
±
SUSPENSION AND AXLE WHEEL ALIGNMENT
WhereEverybodyKnowsYourName
