Changing a Flat Tire (cont'd)
9. Everytime you install the wheel on the brake hub, use a rag to
wipe any dirt off the mounting surface of the hub and the wheel.
This will assure a tight, even contact between the wheel and hub.
10. Install the spare, and lug nuts hand tight.
TIGHTENING TORQUE
110 N.m(11 kg-m,80 Ib-ft)
11. Lower the car, remove the jack, then tighten the lug nuts securely in an "X" pattern as shown.
12. Tighten the lug nuts to the recommended torque is:
110 N.m (11 kg-m,80 Ib-ft)
If a torque wrench was not used, ask an authorized Honda
dealer to verify the torque as soon as possible.
ProCarManuals.comMain Menu s t
