REAR SUSPENSION
Suspension Arm (Cont'd)
Remove axle shaft assembly Refer to Axle
Remove stabilizer bar bolt
Remove suspension arm pin
Before removing, put matching mark on pin.
Shaft for removal
Disconnect shock absorber lower end
When installing, tighten suspension arm pin nut
to specified torque after installing wheels and
placing vehicle on ground under the curb
weight. Refer to Section MA for toe-in adjustment
INSPECTION
Check suspension arm for deformation or
Check rubber bushings for wear or other
If necessary, replace rubber bushing using a
suitable tool.
cracks Replace if necessary.
damage
SRA465
Suspension Member and
Differential Mounting Insulator
INSPECTION
Check differential mounting insulator for
deformation or cracks Replace if necessary
Check suspension member for deformation or
cracks Replace if necessary
If member insulator is deformed or cracked,
replace
it using a suitable tool
a
SRA455
b Install member insulator using a suitable tool.
Be sure to install in
its proper place.
SRA456
RA-16
SERVICE DATA AND SPECIFICATIONS (S. D.S.)
Tightening Torque
Item Nm kg-m ft-lb
Wheel nut 78-98 80-100 58-72
Three-way connector
Connector mounting 5 - 7 05-07 36-51
bolt
Connector to brake 15. 18 15-18 11-13
tube
Brake tube connector 15.18 15-18 11-13
flare nut
Shock absorber
Lower end fwng bolt
Adlustable 59-78 6-8 43 -58
Non-adlustable 69-88 7.9 51 -65
Upper end fixing bolt 31 .42 32-43 23-31
Piston rod self-locking
""1 Adjustable 46-62 47.63 34-46
Non-adjustable 20. 27 20-28 14-20
Suspension member
Suspension member to 78.108 8.11 58-80 suspension member stay
Suspensionmemberstay
20-25 20-26 14-19
to body
Suspension
memberto 98- 118 10- 12 72 .E7 sus~ennon arm
Sprmt seat stay
Stay to suspension arm Front 59-78 6-8 43 - 58
Rear 69-88 7-9 51 -65
Stay to parking cable 16 - 21 16-21 12-15 clamp
Item N-m kg-rn ft-lb
Rear disc brake Baffle plate fwng bolt 8. 11 08-11 58-80
Torque member fixing 38.52 39-53 28.38
bolt
Differential carrier Dafferenttal carrier to 98. 118 10 - 12 72.87
mountma bracket
Mounting bracket to
body Bolt 29-39 3-4 22.29
NU1 59.78 6-8 43 .58
Differential carrier to 59. 78 6.8 43.58 suspension member
Stabilizer Stabtlizer bar to 16.21 16-21 12.15
IYSP~~O~O~ arm
Stabilizer bar clamp to 31 - 42 3 2 4 3 23.31 suspension member
Drive shaft
Drive shaft to companion
flange
Turbo 59.69 60-70 43-51
Non turbo 39-49 40 50 29.36
Wheel bearino lock nut 294.392 30.40 217 - 289
RA-22
