FUEL SYSTEM
WARNING:
When replacing fuel line parts, be sure to observe
the following.
a. Put a "CAUTION. INFLAMMABLE" sign in workshop.
b. Be sure to furnish the workshop with
a C02 fire extinguisher.
c. Be sure to disconnect battery ground cable before conducting operations
d Put drained fuel in an explosion-proof container and put lid on securely.
CAUTION :
Before disconnecting fuel hose, release fuel pressure from fuel he. Refer to the "Releasing Fuel Pressure"
a Do not disconnect any fuel line unless absolutely necessary.
b. Plug hose and pipe openings to prevent entry of dust or dirt
c. Always replace O-ring and clamps with new ones
d.
Do not kink or twist hose and tube when they are installed.
e Do not tighten hose clamps excessively to avoid damaging hoses.
f When installing fuel check valve, be careful of its designated direction (Refer to section EC).
g. Run
the engine and check for leaks at connections
FE-3
