1982 VOLVO 960 change time

70019401960 Specifications
Section 2 B 19, B 23 Engines
General
Group 26 Cooling system
128187
Coolant - composit ion -guarantee
Since aluminium is used in the engines, active corrosion
protection
is necessary in the coolant to help prevent corro­
sion damage.
Use genuine
Volvo coolant, type C (blu e-green), diluted
with clea n water in proportions of SO/50. This mixture helps
to prevent corrosion and frost damage.
• Never top-up the cooling system with water alone. Use
genuine
Volvo coolant diluted with clean water in propor­
tions of 50/50.
•
The coolant should be changed every 40,000 km
(25,000 miles) since the corrosion-protective additives in
the coolant lose their effect in time.
• The cooling system should be cleaned using solvent
PIN 1 161 328-8 prior to filling new coolant.
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . approx 9.5 litres (10.05 US qts)
Expans ion tank
Pressure valve in filler cap opens at:
overpressure
........ ' ..................................... .
underpressure .
.............................. --: ............ .
Thermostat
Marking .................................................... .
Starts to open
at ............................................ .
Fully open at ...................................... ......... .
Fan belts
Designation (Volvo PIN), early type ..... : ...................... .
late type ............................. .
32
65-85 kPa (9.2-12 psi)
7.0 kPa (1.0 psi)
Type 1
87
86-88°C
(187-190°F)
9rC (207°F)
1983
HC 38x925
HC 38 cogX925
Type 2
92
91-93°C
( 196-199°F)
102°C (216°F)
1984
HC 38x913
HC 38 cogX913

70019401960 Specifications
Section 2 B 200, B 230 Engines
General
Expansion tank
Group 26 Cooling system
128187
Coolant -composition -guarantee
Since aluminium is used in the engines, active corrosion
protection is necessary
in the coolant to help prevent corro­
sion damage.
Use genuine
Volvo coolant, type C (blue-green), diluted
with clean water in proportions of 50/50. This mixture helps
to prevent corrosion and frost damage .
• Never top-up the cooling system with water alone. Use
genuine
Volvo coolant diluted with clean water in propor­
tions of 50/50 .
•
The coolant should be changed every 25,000 miles
(40,000
km) since the corrosion -protective additives in
the coolant lose their effect in time.
• Clean cooling system with solvent (P/N 1161328-8
prior to
filling new coolant.
Capacity, B 200/230. . . . . . . . . . . . . . . . . . approx 8.5 litres
US qts 9.0
B 204/234. . . . . . . . . . . . . . . . .. approx 9.5 litres
US qts 10.0
Pressure valve
in filler cap opens at;· . kPa psi
11
14
21
1.0
overpressure, early type .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
late type without turbo . . . . . . . . . . . . . . . . . . . . . . . . . 100
with turbo and B 204/234. . . . . . . . . . . . . . . 150
underpressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 .0
Thermostat
Marking ............................ ........................ .
Starts to open
at ......... .............. ..................... .
Fully open at ............................................... .
66
Type 1
87
86-88 °C
(187-190 °
F)
9rC
(20rF)
Type 2
92
91-93°C
( 196-199 °F)
102°C
(216 °
F)

(
General
70019401960 Specifications
Section
2 B 28 Engine
Group 26 Cooling system
128187
Coolant -composition -guarantee
Since aluminium is used in the engines, active corrosion
protection is necessary
in the coolant to help prevent corro­
sion damage .
Use genuine
Volvo coolant, type C (blue-green ) diluted
with clean water in proportions of 50/50. This mixture helps
to prevent corrosion and frost damage.
• Never top-up the cooling system with water alone. Use
genuine
Volvo coolant diluted with clean water in propor­
tions of
50/50.
•
The coolant should be changed every 25,000 miles
(40,000
km) since the corrosion-protective additives in
the coolant lose their effect in time.
• Clean cooling system with solvent (P/N 1161328-8)
prior to
filling new coolant.
litres
Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.0
US qts
10.5
Expansion tank
Pressure valve in cap opens at:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kPa
overpressure, early type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
late type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
underpressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.0
Thermostat
Marking .................................................... .
Starts opening
at. ........................................... .
Fully open at ............................................... .
Fan belts
Designation, type 1 ..... : ................................ .... .
type
11. ..................•......•................
type III (not B 28 F USA) ......................... .
92
91-93°C (196-199°F)
102°C (216°F)
HC 38 x 1100
HC 38 cog x 1100
HC 38 cog x 1075
psi
11
21
1.0
83
til ·tt til II III '11 III ·tt II'

70019401960 Specifications
Section
2 B 280 E ngine
General
Group 26 Cooling system
Coolant -compos it ion -gua rantee
Since aluminium is used in ihe engines, active corrosion
protection
is necessary in the coolant to help prevent corro­
sion damage.
Use genuine
Volvo coolant, type C (blue-green ) diluted
with clean water in proportions of 50/ 50. This mixture helps
to prevent corrosion and frost damage.
• Never top-up the cooling system with water alone. Use
genuine
Volvo coolant diluted with clean water in propor­
tions of
50/50.
•
The coolant should be changed every 25,000 miles
(40,000
km) since the corrosion-protective additives in
the coolant lose their effect in time.
• Clean cooling system with solvent (P/N 1161328-8)
prior to
filling new coolant.
litres
Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.0 U S qts
10.5
Expans ion tank
Pressure valve in cap opens at:
overpressure ...................................... .. ..... .
underpressure
............................................ .
Thermostat
Marking .. .................................................. .
Starts opening at. ........................................... .
Fully open at ............................................... .
Fan belts
kPa
150
7.0
87
86-88° (187-190°F)
9l" (20l"F)
Designation, 760. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HC 38 cog x 1075
780.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HC 38 cog x 1100
96
psi
21
1.0

(
General
024
Capacity: with manual
gearbox ......... litres (US qts) 9.5
(9.9)
with
aut.
gearbox ......... litres (US qts) 9.2
(9.7)
70019401960 Specifications
Section 2 024, 024 T, 024 TIC Engines
Group 26 Cooling system
128187
024T 024TIC
11.0 11.5
(11.6) (12
.
2)
10.0 11.5
(10.6) (12.2)
Coolant
Since aluminium is used in the engines, active corrosion
protection is necessary in the
coolant to help prevent corro­
sion damage.
Use genuine Volvo coolant type C (blue-green) diluted
with clean water in proportions of 50/50. This mixture helps
to prevent corrosion and frost damage.
• Never top-up the cooling system with water alone . Use
genuine
Volvo coolant diluted with clean water in propor­
tions of 50/50.
•
The coolant should be changed every 25,000 miles
(40,000
km) since the corrosion-protective additives in
the coolant lose their effect in time.
• Clean cooling system with solvent (P/N 1 161 328-8)
prior to
filling new coolant.
• If tropic type radiator is filled add 0.6 (0.6) to above.
Important: do not operate engine if cooling system is not topped-up. Failure to observe this may cause high local tem­peratures which could cause cylinder head to fracture .
Expansion tank /
Pressure valve in cap opens at:
overpressure, early type ............................ kPa (psi)
late type ............................. kPa (psi)
underpressure
............... ...................... kPa (psi)
Thermostat
Marking ..................................................... .
Starts to open
at ............................................ .
Fully open
at ............................................... .
Opening dimension, min ..................................... .
Drive belts Profile x length:
100 (14.2)
150 (21)
10(1.4)
87°C
87 °C
102°C
8 mm
A HC 38 x 1238
B HC 38 x 750
C HC
50 x 913
A HC 47 cog x 1 150
B HC 38 cog x 1 013
C
HC 50 cog x 913
--, / , I 5 I 1 I
--~_/
7401760 -1986 142814
Tightening torque
1 Crankshaft pulley 2 Alternator 3 Fan 4 Power pump
5 AC compressor
Nm
Fan.......................... ............................... 9
189°F
216 °F
0 .
31 in
780 1986 + 7401760 1987
ftlb
6.6
117
lit til' lit ,", ·111 11,1 ·111 1111 ,11'
--'