1982 VOLVO 700 brake fluid

70019401960 Specifications
Section 4 Power Transmission
Automat ic transmission BW 55
Make and type .. ............................................ .
Reduction ratios, 1 st gear ..
................. ................. .
2nd gear
................................... .
3rd gear
................... ................. .
Reverse
.................................... .
Torque converter, type ratio
................................ .. .
Lubricant.
........................... ....................... .
Fluid capacity .................... ........................... .
* ATF = automatic transmission fluid.
1.45:1 x Converter ratios
Borg
Wirner type
55
2.45 :1
1 : 1
2.21 : 1
1-approx 2:1
ATF, type G (or F)*
6.9
litres = 7.2 US qts (inc!. approx 2.5 litres = 2 .6
US qts in torque converter)
.~ Engine type Normal
stall speed*
rls (r/min)
Type
designation
Type plate
colour
....... WAOIIHUH
55 e:> ~~D ~~~I~ f'"OUTUTAUS
B28A 38.3 (2300) 029 SERIAl~ Light brown 131755 * At sea level.
Stall speed drops 2 rls (120 rpm) for each 1000 m increase in altitude .
Throttle cable setting
Distance between adjusting sleeve and stop
at idling .................................................. .
kick -down
........................ ........................ .
C leara nces
Oil pump: pump body -outer cog wheel ....................... .
arc segment -
large cog wheel ...................... .
axial clearance .................................... .
Clutch C2, brakes B1 and B2:
clearance between
clutch assembly pressure plate and
locking ..................................................... .
Input shaft, clutch C1 axial clearance .......................... .
Output shaft,
axial clearance ................................. .
Line pressure
Idling D .................................................... .
R ..................... .... ........................... .
Stall speed, D .................. .............. ...... ........ .
R .............................................. .
140 0.25-1
.0
mm 51 +1.6mm -0.6
0.07-0.30 mm
0.11-0 .50 mm
0.02-0.10 mm
0.3-1 .2 mm
0.20-0 .55 mm
0.20-0.55 mm
(0.001-0.040 in) (2 +0.63 in) (-0.024Ih)
(0.0027-0.118 in)
(0.004-0 .019 in)
(0.0008-0.004 in)
(0.0118-0 .0472 in)
(0.0078-0.0216 in)
(0.0078-0.0216 in)
0.53-0.63 MPa (75-90 psi)
0.74-0.91 MPa (105-129 psi)
1 .12 -1.37
MPa (159-195 psi)
1.54-1.96
MPa (219-279 psi)

Regulator press ure
Final drive ratio 3.31:1
At 30 km/h (19 mph) ........................................ .
At 60 km/h (38 mph) ....... ................................. .
At 110 km/h (69 mph) ....................................... .
Gea r ch anging speeds
Limits for kick -down shift points , km/h (mph)
1-2 ........................................................ .
2 - 3
......... ............................................... .
3-2 ............................. ........................... .
3-1 ...................................................... .. .
Tran smiss io n brake an d clut ch pla tes
Min permissible thickness .................................. .. .
( Tig ht enin g to rq ue da ta
Drive plate - torque converter ....................... ......... .
Torque converter casing -engine, M
10 ....................... .
M12 ..................... ..
Center support -transmission housing
tighten
alternately in steps of 7 Nm (5 ft Ib) ................... .
Pump cover -pump housing
.................. ............... .
Pump -transmission housing ...
............................. .
Plate above parking detent ............................ .... ... .
Torque converter casing -transmission housing
4 x M
10 .................................................. .
2xM12 ....... . r. ............... ......................... .
Rear housing -transmission housing .......................... .
Valve bodies -transmission casing ........................... .
Valve bodies, for cam, M 6 ................................... .
Valve bodies, other bolis, M 5 ................................. .
Cover
plate - gearbox housing ............................... .
Strainer -
lower valve housing M 6 ......................... ... .
Oil pan - transmission housing (yellow gasket) ................. .
Oil pan -transmission housing (blue gasket) ................... .
Drive
plate - output shaft .... ............................. ... .
Blind plug, for pressure test ....................... .. ......... .
* Seal with Locking fluid 1 161 053-2 (1 161 054-2) .
0.10-0.13 MPa
0.14-0.18 MPa
0.30-0.36 MPa
71 (44)
128
(80)
117 (73)
approx.
60 (38)
2.1 mm
Nm
41-50
35-50 55-90
24-28
6-9
22-28
6-9
Nm
26-40
47 -60
26-40
8-12
6-9
5-6
5-6
6-9
6-10
8-12
40-50·
9-12
70019401960 Specifications
Section 4 Power Transmission
(14-18 psi)
(20-26 psi)
(43-51 psi)
(0.083 in)
ftlb
(30-37)
(26-37)
(41-66)
(18-21 )
(4-6)
(16-21)
(4-6)
ftlb
(19-29)
(35-44)
(19-29)
(7-9)
(4-6)
(3-4)
(4-6)
(3-4)
(4-8)
(7-9)
(29-37)
(6-9)
141
'", "" '", "" ·11"
"" ·11.· 1111 ,11'

70019401960 Specifications
Section
5 Brakes
Section 5 Brakes
fJy ~~
132426
B rake fluid
Grade................................... .... ... ............ DOT 4
Fron t wheel brakes
(
Brake disc, outer diameter, .. .................... .. .... mm (in)
thickness new
............................ . mm (in)
change at
........ ........... .............. mm (in)
Alt I Alt" Alt III Alt IV
! non -
ve ntil ated
ve ntilat ed ventilated
ventil ated
('Jumbo')
I
280 (11.0) 287 (11.3) 262 (10.3) 280 (11.0)
14 (0.55)
22 (0.87)
22 (0.87) 26 (1.02)
11.0 (0.43) 20.0 (0.79) 20 .0 (0. 79) 23.0 (0.91)
run-out -1987 ... ....... .. ................. mm (in)
max 0.08 (0.003)
1988-.................. ........... mm (in)
Brake pad thickness, new .
............................ mm (in)
min
.... ............ ........... ... mm (in) max
0
.06 (0.0024)
I 11.5 (0.453)
('Jumbo' 12.0 (0.472)
3
(0. 12)
Rear wheel brakes
Sta ndard Multi -link
Brake disc, outer diameter ....... ...................... mm (in) 281 (11.06)
265 (11.04)
thickness, new ............................. mm (in)
change at
............... ........ mm (in)
runout .
...................... ............. mm (in)
Brake pad thickness , new .
..... ....... ............... . mm (in) 9
.6 (0.378)
10 (0.393)
I
min 8.4 (0.330) 8 (0.314)
max
0.10 (0.0039)
0.08 (0.003)
10
(0. 393)
8 (0.314)
min ............ .................. mm (in)
2 (0.078) 2 (0.078)
T ight enin g torque s
Nm ftlbs
Attaching , bolts , front brake calipers ........................... . 100 (74)
rear brake calipers ............................ .
58 (43)
caliper bracket ....................... ....... . .
48 (35)
front dust
shield .................... ... (approx .)
24 (18)
rear dust
shield ................ ....... (approx.)
brake
caliper, slide pin ................... ..... .
40 (29)
"I 34
(25) II Wheel nuts ................................................. .
85 (63) II II Attaching nuts, master cylinder ..... ................... (approx.) 30 (22) II II Bleeder screws, front ......................... ........ (approx .)
5 (4) II ·11 rear ...... .......... ................. (approx .)
4.5 (3.3) II
Brake pipe unions ...... .......... ............ ............... .
14 (10) Brake hoses to nipple ....................................... .
17 (12)
Nipple to caliper ......... ................................... .
17 (12)
153